TECHNET Archives

January 2006

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Press Fit Pins / Compliance Pins
From:
"Mattson, Jeffrey" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Mattson, Jeffrey
Date:
Tue, 10 Jan 2006 11:49:04 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (39 lines) 
Victor,
Compliant pin connectors are typically used on assemblies that are difficult to solder.  These are usually thick backplanes (.125" - .300" and up).  The heat required to wet and flow solder joints through thick boards can be detrimental.  Compliant contacts are ideal in these situations.  When using compliant contacts,hole size is critical (both drill and finish.
I know this is a very general answer.  What is your application?
                                                                Jeff

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Victor G. Hernandez
Sent: Tuesday, January 10, 2006 11:06 AM
To: [log in to unmask]
Subject: [TN] Press Fit Pins / Compliance Pins


Fellow TechNetters:

   Can some one share their experience when is a compliance pins is a
GOOD candidate for a PWB/PCB insertion.

Victor,

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2