Steve has put my pictures on his web page. (THANK YOU STEVE!)  The pictures
are after conformal coat touch up, but they give an idea of the location,
shape, etc.
They are at:

http://stevezeva.homestead.com/files/Conformal_Coat_Bubble.JPG

http://stevezeva.homestead.com/files/Conformal_Coat_Bubble_2.JPG


On Tue, 24 Jan 2006 09:25:25 -0600, Kelly Morris <[log in to unmask]>
wrote:

>We've got a problem here, where we're hand spraying a urethane conformal
>coat on over a rectangular inductor.
>The inductor body is a plastic tube, with potting to fill.
>The top is not always flat (sometimes concave).
>The problem is that bubbles appear in the conformal coat on the potted
>surface, sometimes right after bake and sometimes days after.
>
>Any ideas on what the root cause is and how to prevent the bubbles?
>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------