There are several recent postings in the archives on this subject.

It depends on the ball alloy. 
 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Kane, Amol (349)
Sent: Thursday, January 19, 2006 7:25 AM
To: [log in to unmask]
Subject: Re: [TN] Building a lead free board (with PB free BGA with
eutectic solder

Hi,
I am grappling with similar issues too. I would not want to mix eutectic
solder with SAC (and therefore not print eutectic solder over the BGA
pads). The interface between the partially melted SAC and fully melted
eutectic alloy is very weak, and will create issue with reliability.

I am still finding out info about what happens to eutectic solder if
driven at SAC temps....please let me know if you find anything, I'll do
the same.

Amol Kane
M.S (Industrial Eng.)
Process Engineer
Harvard Custom Manufacturing
941 Route 38  Owego, NY 13827
Phone: (607) 687-7669 x349
[log in to unmask]

 -----Original Message-----
From:   TechNet [mailto:[log in to unmask]]  On Behalf Of Taylor, Royce
Sent:   Thursday, January 19, 2006 8:11 AM
To:     [log in to unmask]
Subject:        [TN] Building a lead free board (with PB free BGA with
eutectic solder

Question(s),

I am about to build a double sided SMT board using lead free parts and
eutectic solder paste, the only concern I have is that there is one lead
free BGA on the board. I do not know at what temperature the balls will
start to collapse (what is the normal alloy of a PB free BGA)?? AND what
happens if anything to the eutectic solder if I drive the reflow temps
to the needs of the BGA? Will the intermixing of the two different
alloys be an issue for reliability? Would you treat this BGA like a hi
temp leaded BGA and ADD solder paste volume to the land pads?

A second question is, I have a different customer that wants a eutectic
BGA replaced with its PB free counterpart. Can I use just tacky flux and
drive the profile hotter to get the balls to a liquidous state and get
good wetting/solder joints.

Your experiences would be a huge help

Thanks
************************************************************************
*
Royce Taylor
Process Engineering/Production
Suntron Corporation NEO
104 Glenn Street
Lawrence, MA 01843
(978)747-2061 voice
(978)747-2010 fax
[log in to unmask]

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------