TECHNET Archives

January 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Hodge <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Steve Hodge <[log in to unmask]>
Date:
Tue, 17 Jan 2006 14:44:40 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (48 lines)
99% of all the hole callouts I see are for finished hole size for
through hole as well as press fit connectors. You have to consider
what surface finish you are using when planning the drill size. Most
plated holes for components and connectors have a tolerance of
+/-.003 and vias are +.003/-nominal. Most fabricators have a good
historic knowledge of what drill size to use to obtain the desired
results. I would much prefer that a designer leave this type of
parameter up to the fabricator. Typically you specify what you expect
to receive and tolerance those expectations. Leave the manufacturing
methods and tools up to the fabricator.



At 01:45 PM 01/17/2006, you wrote:
>Hi Ofer,
>The reason for this is that many of the Fab houses still live in the past,
>and do not understand what is required for high reliability in high-density
>PCBs. The involved Fab houses cetainly understand those needs.
>
>
>
>Werner
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
>information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2