Subject: | |
From: | |
Reply To: | |
Date: | Fri, 27 Jan 2006 06:01:46 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
George,
Can you share the information regarding the ENEPIG surface finish.
I had not heard of this process. Who developed this and how long in
use.?
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of George Milad
Sent: Thursday, January 26, 2006 4:28 PM
To: [log in to unmask]
Subject: Re: [TN] Immersion Gold and LF PROCESS
ENIG is a viable surface finish for lead free, data was presented at the
LF
conference on the solder joint reliability of this finish with SA 305
alloy.
DIG direct immersion gold is the direct deposition of 2 micro-inches of
gold
on copper.
Of course Immersion silver, immersion Tin and OSP are equally viable.
A unique surface finish that gave the most reliable solder joint with
SAC
305 alloy was ENEPIG electroless Ni electroless Pd with Immersion Gold.
Best regards
George Milad
[log in to unmask]
National Accounts Manager for Technology
Uyemura International Corporation
Technical Center
240 Town LIne Rd
Southington CT 06489
(516) 901 3874 (mobile)
(860) 793-4011 (office)
(860) 793-4020 (fax)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|