No, it is not true, I was just kidding around.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of David Tremmel
Sent: Wednesday, January 11, 2006 2:22 PM
To: [log in to unmask]
Subject: Re: [TN] System International Units versus Imperial English units??
And if it is all true, expressing that much knowledge at one time could lead to obscenity charges.
After all, that was a vulgar display of knowledge, but that just goes to proves that I have not 'obscene' it all :)
David
>From: Cheryl Johnson <[log in to unmask]>
>Reply-To: TechNet E-Mail Forum <[log in to unmask]>, Cheryl
>Johnson <[log in to unmask]>
>To: [log in to unmask]
>Subject: Re: [TN] System International Units versus Imperial English
>units??
>Date: Wed, 11 Jan 2006 12:54:59 -0700
>
>Richard,
>Is all the stuff "true"?
>
>Sincerely,
>-----------------------------------
>Cheryl Johnson, C.I.D.+
>Manager
>ExcelStor US Office, Engineering Services
>Email: [log in to unmask]
>Tel: (303) 684-7291
>Fax: (303) 684-7268
>Mobile: (303) 809-5815
>-----------------------------------
>
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]]On Behalf Of Stadem, Richard D.
>Sent: Wednesday, January 11, 2006 12:38 PM
>To: [log in to unmask]
>Subject: Re: [TN] System International Units versus Imperial English
>units??
>
>
>I'm laughing!
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of Michael McMonagle
>Sent: Wednesday, January 11, 2006 1:36 PM
>To: [log in to unmask]
>Subject: Re: [TN] System International Units versus Imperial English
>units??
>
>I think the auditor might have a slightly different name for Richard,
>but it's something not repeatable in polite company <g>....
>
>Mike McMonagle
>Quality Engineer
>OYO Geospace
>7007 Pinemont Drive
>Houston, TX 77040
>713-986-8650
>
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas O. Pauls
>Sent: Wednesday, January 11, 2006 1:11 PM
>To: [log in to unmask]
>Subject: Re: [TN] System International Units versus Imperial English
>units??
>
>Richard, you are one scary scary dude.
>
>Doug Pauls
>
>
>
>
> "Stadem, Richard
> D."
> <Richard.Stadem@G
>To
> D-AIS.COM> [log in to unmask]
> Sent by: TechNet
>cc
> <[log in to unmask]>
>
>Subject
> Re: [TN] System International
>Units
> 01/11/2006 12:54 versus Imperial English units??
> PM
>
>
> Please respond to
> TechNet E-Mail
> Forum
> <[log in to unmask]>
> ; Please respond
> to
> "Stadem, Richard
> D."
> <Richard.Stadem@G
> D-AIS.COM>
>
>
>
>
>
>
>Don't put him on the spot. That is not a good thing to do to an auditor.
>Instead, give him a conspiratorial wink and acknowledge his observation
>with a remark such as "Hey, you're a pretty sharp guy to pick up on
>that!"
>
>Then ask him where he learned about the elementary constituants of a
>thermally active physical system, where kBT is temperature expressed in
>terms of Boltzmann's constant, in Kelvin. And did he know that
>thermodynamic equilibrium is defined by a relation between the amount
>of heat incident on the system during an infinitesimal quasistatic
>transformation, and what is the variation of its time-to-entropy during
>the transformation?
>
>If he nods wisely, ask him what are his feelings about the effects of
>the gas expansion factor when calculating the Zeroth dynamic during
>measurements of the thermal mass to entropy betweem multiple static
>objects collectively within a vacuum using Boltzmann's theory of
>distribution.
>
>At this point, while he stands there and stutters with his eyes glazed
>over, let him know that the reasons you used only temperatures Celcius,
>is because after much research looking at the Carnot heat engine
>equivalency of a standard PWB using a dissipation factor of 10 while
>powered up with 100kiv/cm squared, it was apparent that with the heat
>conduction factor being what it is at 22 gigahertz and its effect on
>the overall conductance, the only apparent measurements that would work
>would be in the Reaumur, Rankine, Delisle, and Newton units for the
>needed accuracy inherent to the process, because the conversion factors
>from these to the terakelvin range are beyond the scope of the
>computational system you are using to meet the contract.
>
>And the dweebs in IS cannot provide any more memory capability to your
>desktop PC.
>
>The key here is to answer their questions precisely.
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Naisbitt
>Sent: Wednesday, January 11, 2006 12:06 PM
>To: [log in to unmask]
>Subject: Re: [TN] System International Units versus Imperial English
>units??
>
>Now if you really want to put this guy on the spot, tell him that,
>according to all International Standards, temperatures must be measured
>in Degrees Kelvin and could you borrow his thermometer.
>
>Don't shoot me, I'm only the messenger......
>
>Graham Naisbitt
>
>
>On 11/1/06 16:31, "Douglas O. Pauls" <[log in to unmask]>
>wrote:
>
> > What you might also do is to put down the number in every possible
> > unit you can think of, C, F, K, hell make up a few units. Take it
> > to an absurd level to make your point.
> >
> > Doug Pauls
> >
> >
> >
> >
> > Ahne Oosterhof
> > <[log in to unmask]
> >> To
> > Sent by: TechNet [log in to unmask]
> > <[log in to unmask]>
>cc
> >
> >
>Subject
> > 01/11/2006 09:39 Re: [TN] System International
>Units
> > AM versus Imperial English units??
> >
> >
> > Please respond to
> > [log in to unmask]
> >
> >
> >
> >
> >
> >
> > Oh boy, that is funny.
> > So why am I crying?
> >
> > Ahne.
> >
> >
> > -----Original Message-----
> > From: TechNet [mailto:[log in to unmask]] On Behalf Of Rick Thompson
> > Sent: Tuesday, January 10, 2006 12:03
> > To: [log in to unmask]
> > Subject: [TN] System International Units versus Imperial English
>units??
> >
> > We have a customer who is questioning how we audit soldering iron
> > temperatures per J-STD-001D. All of our monitoring is done in
> > Celsius
>
> > which is the main unit of measure in the standard. Imperial English
> > (Fahrenheit) is only used as a reference shown in parentheses. The
> > auditor is insisting that we need to measure in both units, i.e. we
> > have a temperature with a
> > +/-
> > 15C tolerance and we would also need to measure it in degrees F at
> > +/-
>27F.
> >
> > My question is has anyone come up against this type of issue and how
> > did you handle it? We've cited the section of the standard where it
> > explicitly indicates that the IE units are equivalent and shown for
> > reference only but this response was deemed as 'inadequate'. I'd
> > typically put this in the category of Friday afternoon humor except
> > we
>
> > have a corrective action to respond to due to this.
> >
> > Thanks for any comments or feedback.
> >
> >
> > Rick Thompson
> > Sr. SMT Process Engineer
> > CTS Electronics Manufacturing Solutions
> >
> > +1 (805) 532-2800 x-193
> > [log in to unmask]
> > www.ctscorp.com
> >
> >
> >
> > ---------------------------------------------------
> > Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> > To unsubscribe, send a message to [log in to unmask] with following
> > text in
>
> > the BODY (NOT the subject field): SIGNOFF Technet To temporarily
> > halt or (re-start) delivery of Technet send e-mail to
> > [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE
> > mailing per day of all the posts: send e-mail to
> > [log in to unmask]: SET Technet Digest Search the archives of previous
> > posts at:
> > http://listserv.ipc.org/archives Please visit IPC web site
> > http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> > for additional information, or contact Keach Sasamori at
> > [log in to unmask] or 847-615-7100 ext.2815
> > -----------------------------------------------------
> >
> > ---------------------------------------------------
> > Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> > To unsubscribe, send a message to [log in to unmask] with following
> > text in
>
> > the BODY (NOT the subject field): SIGNOFF Technet To temporarily
> > halt or (re-start) delivery of Technet send e-mail to
> > [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE
> > mailing per day of all the posts: send e-mail to
> > [log in to unmask]: SET Technet Digest Search the archives of previous
> > posts at:
> > http://listserv.ipc.org/archives Please visit IPC web site
> > http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> > for additional information, or contact Keach Sasamori at
> > [log in to unmask] or 847-615-7100 ext.2815
> > -----------------------------------------------------
> >
> > ---------------------------------------------------
> > Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> > To unsubscribe, send a message to [log in to unmask] with following
> > text in
>
> > the BODY (NOT the subject field): SIGNOFF Technet To temporarily
> > halt or (re-start) delivery of Technet send e-mail to
> > [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE
> > mailing per day of all the posts: send e-mail to
> > [log in to unmask]: SET Technet Digest Search the archives of previous
> > posts at:
> > http://listserv.ipc.org/archives Please visit IPC web site
> > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> > information, or contact Keach Sasamori at [log in to unmask] or
> > 847-615-7100 ext.2815
> > -----------------------------------------------------
> >
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
>unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
>or
>(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
>Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
>posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
>archives of previous posts at: http://listserv.ipc.org/archives Please
>visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
>additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
>unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
>or
>(re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
>per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
>http://listserv.ipc.org/archives Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask]
>or 847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
>unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
>or
>(re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
>per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
>http://listserv.ipc.org/archives Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask]
>or 847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
>unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
>or
>(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
>Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
>posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
>archives of previous posts at: http://listserv.ipc.org/archives Please
>visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
>additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
>unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
>or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
>per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
>http://listserv.ipc.org/archives Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask]
>or 847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
>unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
>or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
>per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
>http://listserv.ipc.org/archives Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask]
>or 847-615-7100 ext.2815
>-----------------------------------------------------
_________________________________________________________________
Visita MSN Latino Entretenimiento: ¡música, cine, chismes, TV y más...!
http://latino.msn.com/entretenimiento/
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|