Sender: |
|
X-To: |
|
Date: |
Mon, 9 Jan 2006 10:35:32 +0200 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=ISO-8859-1; format=flowed |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Phosphor bronze is not the most easily wetted alloy and often requires a
fairly active flux. For this reason, PB parts are often pre-tinned,
using a water-soluble flux for the process, followed by a good wash.
Brian
Wee Mei wrote:
> Hello,
>
> During assembly inspection, noticed that the solder joints on the 2 sided
> leads for Hirose connector, MQ172-3PA do not wet well. From the datasheet,
> it seems to be of phospher bronze. As I am not a chemical gal, is this the
> cause as we are using Sn37/Pb63 solder with liquid flux.
>
> Thanks in advance for your response.
>
> Regards,
> Wee Mei
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
> ext.2815
> -----------------------------------------------------
>
--
______________________________________________
Please note new e-mail address [log in to unmask]
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|