Content-type: |
text/plain; charset=US-ASCII |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Mon, 30 Jan 2006 16:31:20 -0500 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Hi Jon-
If your experiments lead you to thinking about shrinking the hole, remember
why they recommended it to be so large in the first place. You may start to
see mis-insertions wuth a smaller hole. It'd be hell to solve one problem
only to create another....
Good Luck,
-Chris
Jon McDowell
<[log in to unmask]> To: [log in to unmask]
Sent by: TechNet cc:
<[log in to unmask]> Subject: [TN] Pansert AVKII through hole diameter?
01/27/2006 06:18 PM
Please respond to TechNet
E-Mail Forum; Please
respond to Jon McDowell
Hello group
My name is Jon McDowell, and I work as a Quality Technician at ECCO in
Boise ID. We manufacture back-up warning alarms for the auto/truck
industries.
I have a question for you.
We are using the Pansert AVKII through hole insertion machine, which
call out that the diameter for through holes be .020 larger than the
upper tolerance of the wire diameter being inserted in that hole.
However I have been informed that a hole which is .020 over the lead
diameter may cause problems with soldering, particularly with the SAC95
solder. Can anyone advise on this.
Thank You
Jon McDowell
Electronic Controls Co (ECCO)
833 W Diamond St
Boise Id 83705
P 208 395-8025
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|