Tugmen,
Seems to me as you nearly got military requirements, or space ones. You
don't mention what kind of storage, there are numerous conditions:
storage at room, in polluted environment, at high temperature, in
humidity etc. In general we follow this one:
http://www.dscc.dla.mil/downloads/vqgeneral/790_booklet_041101.pdf
then we fill in this tiny piece of paper:
http://www.dscc.dla.mil/downloads/VQGeneral/FEDD1718000101.pdf
and this one:
http://www.dscc.dla.mil/downloads/VQGeneral/DSCC-VQP_19P_0507.pdf
and all put their signatures on and feel good (sarchasm)..
Tugmen,there are european corresponding requirements, french, UK, german
etc, that may suit you better, but in principal very similar to the
DSCC.
Then we go to the technicalities, i.e. the testing.Technically, a
COMPLETE requalification would be VERY expensive, who will pay? Or
maybe it's enough to show your customer records from a renewed final
automatic measurement? You may use the below as a MODEL and fact source,
but it's an expensive way, as I said. A reasonable agreement with your
customer must be the best way.
http://nepp.nasa.gov/eeelinks/February2002/Test_Flows_for_Space_PEMs.htm
another source is IEC/TR 60721-4-1:2001 which you can buy below:
http://webstore.iec.ch/webstore/webstore.nsf/artnum/030681
Still confused, but at a higher level now?
Inge
-----Ursprungligt meddelande-----
Från: TechNet [mailto:[log in to unmask]] För TUGMEN UNSAL (MIKES INTERNET)
Skickat: den 8 december 2005 08:30
Till: [log in to unmask]
Ämne: Re: [TN] analysis method for storage
Dear all,
I'm re-writing my question again to be able to do good explanation.
STORAGE is the one of requirements of our project.
We have to show with any analysis that the unit have to meet all
requirements of our contract specification WITHOUT COMPONENT OR PART
REPLACEMENT, ADJUSTMENT, OR MAINTENANCE AFTER BEING IN STORAGE FOR UP TO
18 MONTHS.
Regards,
Tugmen.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of TUGMEN UNSAL (MIKES
INTERNET)
Sent: Wednesday, December 07, 2005 11:40 AM
To: [log in to unmask]
Subject: [TN] analysis method for storage
Dear all,
We're in need some help regards to STORAGE for our electronic equipment.
How can it be shown that without component or part replacement,
adjustment or maintenance after being in storage up to 18 months. ?
Is there any known method to show it with an analysis.?
Regards,
Tugmen.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
