Some really, really cheap boards are fiber based, but I do not think
that the flash point of them is low enough, it has to be soldered to. Do
they clean with a flammable solvent that in being absorbed by the board
of trapped under the part by adhesive. Whatever it is that is flaming it
has to be after solder attachment.
IMHO

-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
Scott, Ron
Sent: Thursday, December 08, 2005 6:07 PM
To: [log in to unmask]
Subject: [DC] Flammability of FR4

All,

I have a customer that is having an isuue with their boards bursting
into flame when using one of our devices. Our device comes in two
flavors, TQFP & QFN. The QFN is the device that ignites the board. My
question is: Does FR4 have a flash point? I'm quite familiar with Tg
ratings but I haven't heard about a flash point. Is there such a thing?
If so, where can I find information? Manufacturer will not reveal board
material to me.

Cheers,

Ron Scott C.I.D.
Texas Instruments
Storage Products Group
Tel: 214.567.4715
Cell: 972.816.7978
Fax: 972.761.5070
[log in to unmask]

------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------