DESIGNERCOUNCIL Archives

December 2005

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Type:
text/plain
Sender:
DesignerCouncil <[log in to unmask]>
Subject:
From:
"Brooks,Bill" <[log in to unmask]>
Date:
Thu, 15 Dec 2005 15:14:22 -0800
MIME-Version:
1.0
X-To:
Designers Council Forum <[log in to unmask]>
Reply-To:
"(Designers Council Forum)" <[log in to unmask]>, "Brooks,Bill" <[log in to unmask]>
Parts/Attachments:
text/plain (95 lines)
SDDC Meetings and Events -YOU ARE INVITED TO ATTEND-
San Diego Chapter of the IPC Designers Council is pleased to present the
following:

                Wednesday, Jan 25th, 2005 @ 6:00PM
                        Rick Norfolk
                                of
                        Hallmark Circuits
                          Presenting:

"Controlled Impedance, from the Fabricator's Point-of-View"

 MARK YOUR CALENDAR!!!

                ***

   The presentation will briefly cover what various types of impedances
exist. Mostly the presentation will cover cores/preg material and how they
interlink with the finished line width to get the impedance value desired by
the OEM. We will cover 'loss to fill ratios' within a board stack-up and how
this affects the impedance values and how the percentage of copper of a
particular layer is important in determining the dielectric thickness to the
reference planes of the various impedance types.

 This presentation will help designers better understand what is involved
from a fabricator's standpoint in meeting the required impedance values of a
design and the importance of working with a fabricator during the design
phase.
                ***

Rick Norfolk is a Sales Applications Engineer for Hallmark Circuits in
Poway, California. Rick has been working in the printed circuit industry for
approximately 28 years. He started his career at TRW, Printed Circuits
Division (later becoming Benchmark Technology) as a planner. Rick was a
Planning Engineer at Sigma Circuits for 7 years. He worked for 5 years as a
Product Engineer at Hadco/Sanmina in Owego, New York and there he worked
with OEM designers on fabrication and design issues and specialized in
controlled impedance applications.

Rick has been an Applications Engineer with Hallmark Circuits now for almost
5 years. He routinely provides guidance to their customers in board material
and board layer stack-up recommendations for controlled impedance designs.
Rick has made several presentations to Hallmark's customers and fabricators
regarding controlled impedance design challenges and their solutions and he
assists them with all aspects of the printed circuit board's fabrication.
Rick holds a B.A. Degree from California State University at Fullerton.

Who should attend?  Signal Integrity Engineers and PCB Designers

Meeting Agenda:

 6:00PM - Dinner
 6:30PM - Announcements and Introductions
 6:45PM - Presentation
 7:45PM - Q&A
 8:00PM - Adjourn


  Hosted by the San Diego Chapter of the IPC Designers Council

Meeting will be held at :
Hallmark Circuits
13500 Danielson Street
Poway, CA 92064
(858) 513-2200

 RSVP to mailto:[log in to unmask]  by Tuesday, Jan 24th, 2006.

IPC Designers Council Members will be admitted free of charge, Non-Members
will be asked to contribute a $5.00 donation at the door. Contributors will
get a $5.00 discount applied to their membership should they decide to join
the IPC Designers Council at the event.

More information about the IPC Designers Council is available on-line at
http://www.ipcdesignerscouncil.org or http://dcchapters.ipc.org/SanDiego

Bill Brooks - KG6VVP
PCB Design Engineer, C.I.D.+, C.I.I.
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
Datron World Communications, Inc.
_______________________________________
San Diego Chapter of the IPC Designers Council
Communications Officer, Web Manager
http://dcchapters.ipc.org/SanDiego/
http://pcbwizards.com

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------

ATOM RSS1 RSS2