TECHNET Archives

November 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Phil Nutting <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Phil Nutting <[log in to unmask]>
Date:
Thu, 3 Nov 2005 15:38:39 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (194 lines)
Hmmm... Bev and Brian do you want to weigh in on this? 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Joe Russeau
Sent: Thursday, November 03, 2005 3:08 PM
To: [log in to unmask]
Subject: Re: [TN] compressed air

Phil,

What ionic element does alcohol leave on the board surface?  I'm not
sure
that I would agree with that statement, especially since alcohol
(isopropyl
to be exact) is defined in many of the IPC specifications for
cleanliness
testing such as: IC (2.3.28); ROSE (2.3.25) and Mod-ROSE (2.3.25.1).  I
agree that alcohol is not a good solvent in all cases.  Keep in mind
that
the old chemistry premise is that "like dissolves like".  In some
instances
it may be okay if used on alcohol based materials.  The point being that
you
need to match materials and make darn sure you're getting them
completely
rinsed off.

Best Regards,

Joe Russeau
Process Analyst

Precision Analytical Laboratory, Inc.
4106 Cartwright Dr. Ste. A
Kokomo, IN 46902

P: 765-455-1993
F: 765-455-1996
E: [log in to unmask]

----- Original Message -----
From: "Phil Nutting" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, November 03, 2005 2:44 PM
Subject: Re: [TN] compressed air


> But Ramon, all the experts in this forum have repeatedly stated that
> alcohol is a poor cleaning agent.  It desolves any oil, greases or
> fluxes and then redeposits a thin layer everywhere as the alcohol
> evaporates.  Oh, and it also leaves an ionic element on the board
> surface.
> The DI water wash is a better solution IMHO.
>
> Phil
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Dehoyos, Ramon
> Sent: Thursday, November 03, 2005 2:32 PM
> To: [log in to unmask]
> Subject: Re: [TN] compressed air
>
>       It would be better in a exhaust hood. To get very clean air, use
> an in line air refrigerant system. They cost around $ 800.00 and are
low
> maintenance. Hook an ESD air gun to blow and you are ready to remove
> those bunnies. I would clean them in alcohol bath with a brush
> afterwards to make sure they are all clean.
>         Ramon
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Bloomquist, Ken
> Sent: Thursday, November 03, 2005 11:20 AM
> To: [log in to unmask]
> Subject: Re: [TN] compressed air
>
> Hi Barb,
>
> We do this all the time and depending on how bad it is we either
gently
> blow with an ionized air gun in the return and repair area or if it's
> worse we'll actually take it out on the loading dock and give it a
good
> blast again using an ionized air gun.
>
> If you are not sure about where it's been or what sort of "dust
bunnies"
> are on it you might want to wear a dust mask.
>
> KennyB
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Barbara J. Rich
> Sent: Thursday, November 03, 2005 8:00 AM
> To: [log in to unmask]
> Subject: [TN] compressed air
>
>
>
> I am looking for any information on using compressed air to blow off
> "dust bunnies" on circuit boards coming from the field.
>
>
>
> Barb Rich
>
> Admin. Support Mfg.
>
> Sanmina-Sci
>
> 321 S. Taylor Ave.
>
> 303-264-2009
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
> unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or
> (re-start) delivery of Technet send e-mail to [log in to unmask]: SET
> Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
> posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
> archives of previous posts at: http://listserv.ipc.org/archives Please
> visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for
> additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text
> in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100
> ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text
in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
> -----------------------------------------------------
>
>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2