TECHNET Archives

November 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Dehoyos, Ramon" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Dehoyos, Ramon
Date:
Thu, 3 Nov 2005 14:32:05 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (71 lines)
      It would be better in a exhaust hood. To get very clean air, use
an in line air refrigerant system. They cost around $ 800.00 and are low
maintenance. Hook an ESD air gun to blow and you are ready to remove
those bunnies. I would clean them in alcohol bath with a brush
afterwards to make sure they are all clean.
        Ramon

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bloomquist, Ken
Sent: Thursday, November 03, 2005 11:20 AM
To: [log in to unmask]
Subject: Re: [TN] compressed air

Hi Barb,

We do this all the time and depending on how bad it is we either gently
blow with an ionized air gun in the return and repair area or if it's
worse we'll actually take it out on the loading dock and give it a good
blast again using an ionized air gun.

If you are not sure about where it's been or what sort of "dust bunnies"
are on it you might want to wear a dust mask.

KennyB

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Barbara J. Rich
Sent: Thursday, November 03, 2005 8:00 AM
To: [log in to unmask]
Subject: [TN] compressed air

  

I am looking for any information on using compressed air to blow off
"dust bunnies" on circuit boards coming from the field.

 

Barb Rich

Admin. Support Mfg.

Sanmina-Sci

321 S. Taylor Ave.

303-264-2009

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2