Jason,
        Check the Brady PAM3000 at www.bradyid.com or the Tharo PA1200 at
www.tharo.com. These are both stand-alone, I've used the Brady in a past
life. Minimum label size is .20 x.20, so your .12 x .12 is too small. The
systems work real good on single-up boards, panels will require some sort of
registration tooling (or a laser pointer) to align properly through the step
and repeats. Don't know of any benchtop systems that can do panels
automatically. Also, each label size requires a dedicated tamp applicator
sized to match the label. 

Mike McMonagle
Quality Engineer
OYO Geospace
7007 Pinemont Drive
Houston, TX 77040
713-986-8650
 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Jason Gregory
Sent: Wednesday, November 30, 2005 10:15 AM
To: [log in to unmask]
Subject: [TN] Automated Labeling Systems

Does anyone here have any good leads on automated labeling systems? I'm
looking for something stand-alone, not in-line. I want to place labels
ranging from .12"x.12" to .25"x1.5" on boards ranging from 1.5"x4" to
12"x12", some panelized, some not.

Contact me offline if necessary.


TIA

Jason Gregory
Manufacturing Engineer
Innova Electronics
(281)653-5593
(281)653-5594 fax
(281)212-0844 cell
[log in to unmask]


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------