Perhaps I was not clear enough in my explanation yesterday. Solder tails
refers to the portion of the connector leads that are going to be
soldered in the holes in the circuit board. In this print, the connector
tails will have 100 uinches of tin lead or bright tin. The contact
portion of the leads will have gold. The gold makes for a good
electrical contact at the mating surface. The ends or tails of the leads
that go into the holes in the circuit board and get soldered will be
finished with tin or tin/lead in order to form a good solder joint.

________________________________

From: TechNet [mailto:[log in to unmask]] On Behalf Of joseph H.smith
Sent: Thursday, November 10, 2005 11:45 PM
To: [log in to unmask]
Subject: Re: [TN] What is solder tails



Dear All, 

        Pls find the attached datasheet which refers solder tails area
in top most corner , couldn't Visualize the solder tails in that
component. 
Help me to understand!. 

Thanks and Regards 
Suganthi 




---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------