Subject: | |
From: | |
Reply To: | |
Date: | Tue, 22 Nov 2005 09:27:56 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Good Morning Thomas,
We would suggest doing a combination of Ion Chormatography (IC) and Surface
Insulation Resistance (SIR) to qualify new materials, especially when
transitioning to a new flux. The IC will allow you to characterize the flux
by identifying and quantifying the remaining ionic species post processing.
Additionally, the IC can aid in determining if your aqueous cleaning process
is effective at removing the remaining flux residues. Further, IC can
identify many different organic species. Omegameters do not have the ability
to specify each ion species, rather the value that is generated is for the
total ionic (all ionic speicies) content measured on the board.
SIR is good for determining if the leftover flux residues are going to put
your boards at risk of electrochemical problems, such as dendritic growth
and/or corrosion.
It has been our experience that the combination of these two tests gives a
pretty good overall feel for how the the flux will perform from a residue
standpoint. Hope this helps. If you would like to discuss further, please
feel free to contact me offline.
Best Regards,
Joe Russeau
Process Analyst
Precision Analytical Laboratory, Inc.
4106 Cartwright Dr. Ste. A
Kokomo, IN 46902
P: 765-455-1993
F: 765-455-1996
E: [log in to unmask]
----- Original Message -----
From: "Long, Thomas - Avionics" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, November 22, 2005 9:00 AM
Subject: [TN] Water Soluble Flux
> I am looking for some advice on qualifying a process for
> switching from RMA flux to water soluble flux. I am aware that a large
> company learned through SIR testing (too late) that when switching from
> RMA to water soluble their cleaning process was not effectively cleaning
> all of the flux residues off and it was causing performance issues. The
> company actually had to scrap product and revisit type of flux and
> cleaning. I'm not sure if organic flux residues can be detected with
> omegameter cleanliness testing and this product is class 3 high rel.
>
> I appreciate any input and experiences that anyone can share.
>
> Tom Long
> ITT Avionics
>
> ************************************
> This e-mail and any files transmitted with it are proprietary and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this e-mail in error please notify the sender. Please
note that any views or opinions presented in this e-mail are solely those of
the author and do not necessarily represent those of ITT Industries, Inc.
The recipient should check this e-mail and any attachments for the presence
of viruses. ITT Industries accepts no liability for any damage caused by any
virus transmitted by this e-mail.
> ************************************
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
> -----------------------------------------------------
>
>
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|