Subject: | |
From: | |
Reply To: | |
Date: | Fri, 18 Nov 2005 22:26:20 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
John,
That was more than I was expecting, thanks
Franklin
-----Original Message-----
From: John Parsons [mailto:[log in to unmask]]
Sent: Friday, November 18, 2005 5:33 PM
To: 'TechNet E-Mail Forum'; 'Franklin Asbell'
Subject: RE: [TN] Drilling questions
See below
John Parsons
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Franklin Asbell
Sent: Friday, November 18, 2005 2:25 PM
To: [log in to unmask]
Subject: [TN] Drilling questions
Can someone explain to me what the Letter/Numbers in a drill program mean?
The following is a line from a drill program
C0.0098F036S110.B0800Z-0.012H350
C0 = Starts the program
0098 = Drill (tool) size
[John Parsons] C0.0098 = tool diameter (inches)
F036 = Feed, but what is 036?[John Parsons] Feed Rate (ips)
S110 = 11000 or 110000 RPMs[John Parsons] RPM (110000)
B0800 =[John Parsons] Macro Code ?? (we never use these so I can't provide
more detail)
Z-0.012 =[John Parsons] Z-axis height adjustment from datum
H350 = 350 drill hits[John Parsons] Max hits allowable for this tool before
change
Also, can someone provide a simpler method for determining chip load?[John
Parsons] I have attached a calculator that you may find useful.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|