Hi Werner
I agree that one of the characteristics of the straight-ramp (or "tent")
profile is that there is potential for a larger gradient at peak than with the
classic ramp-soak-spike (since the soak portion allows for a reduction of
gradient prior to the reflow thermal excursion) but the choice is application
specific. Many applications will be able to attain a low gradient with the straight
ramp profile and a moderate rate of heating (< 2 deg. C/sec) even with the
much tighter process window imposed by the lead-free alloys. Some more complex
assemblies (in terms of mass and surface geometry) will do better, as you
imply, with the ramp-soak-spike profile.
And for those real "mother" boards, there's always vapor phase !
Phil Zarrow
ITM Consulting
Durham, NH USA
www.ITMconsulting.org
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------