Dear TechNetters,

Does anyone know of an IPC, MIL or other specification regarding
acceptability criteria for coverage/skips/pinholes of silver polymer screen
printed areas as applied to flexible circuits?

I looked through IPC-A-600G and couldn't find an explicit reference. In the
absence of anything else, would IPC-A-600G 4.1.2 apply?

Thanks for any wisdom and/or advice in advance.

Regards,
Phil Anslow
Principal Engineer, PCB Packaging
MBDA UK Ltd
Six Hills Way
Stevenage
Hertfordshire. SG1 2DA
Tele +44 01438 756127
Fax +44 01438 752662
email [log in to unmask]


********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------