TECHNET Archives

October 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Kelly Morris <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Kelly Morris <[log in to unmask]>
Date:
Tue, 4 Oct 2005 11:35:45 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (66 lines)
On Tue, 4 Oct 2005 09:41:57 -0700, Joel Mearig <[log in to unmask]> wrote:

>Kelly,
>The pins are part of a connector so they are solid from that view points.
>They are not tight in the thru-holes so they must be tacked to secure
before
>soldering balance of pins.              Joel
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of Kelly Morris
>Sent: Tuesday, October 04, 2005 9:17 AM
>To: [log in to unmask]
>Subject: Re: [TN] Hand Soldering Long Gold Pins
>
>Joel:
>Are the pins you are trying to solder secure in the thru-holes before
>soldering, or are they loose?
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
>-----------------------------------------------------

Joel:
I beleive these connectors are available with solder bearing leads.  Then
all you have to do is add flux and send through a reflow oven.

If you must deal with the connectors you have, you might want to consider
solder preforms.  They should be available from your solder/flux supplier.
Then all you do is slip a solder preform (shaped like a washer) over each
pin and add flux (if its not already on the preform) and then send thru
your reflow oven.

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2