Greetings,

We have an application where we will be attaching a buss bar that is 6
inches in length X .50 inch wide X .125 inch thick to the surface of our
PCBA. The buss bar material is currently spec'd as full hard copper and is
tin-lead plated.

The .50 inch width side of the buss bar will be the surface soldered to
the PCBA.

My questions to you are

1) What process would be used to solder this bar to surface of the PCBA?

2) What plating options would be recommended other than tin-lead for this
buss bar?

The end use application for this will require that it handle 1000A of
current in a worst case scenario.

Thanks in advance,

John Bauer

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------