Subject: | |
From: | |
Reply To: | |
Date: | Tue, 20 Sep 2005 07:31:51 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Yusuf,
I recommend that deionized water be used for all rinsing, especially prior
to solder mask application. Deionized water will have a maximum of 0.5
microseimen/cm conductivity and should have all of the minerals removed.
Doug Pauls
Baski Devre
<yusuf.gomec@BASK
IDEVRE.COM.TR> To
Sent by: TechNet [log in to unmask]
<[log in to unmask]> cc
Subject
09/20/2005 12:44 [TN] Water Analyse
AM
Please respond to
TechNet E-Mail
Forum
<[log in to unmask]>
; Please respond
to
Baski Devre
<yusuf.gomec@BASK
IDEVRE.COM.TR>
Dear Technetters
As you know that there are lots of surface treatment before
printing solder
mask. For the single side and double side PCBs inherint process copper
sides
of the PCBs are subjected to etching and precleaned before printing
soldermask with water. So there may occur some smear problem after printing
soldermask. We would like to know that if there are any water parameters
used to clean pcbs before solder mask printing. I have reached some
information. There may occur some deposits on pcb which may cause smear or
CaCO3 due to water hardness. Or conductivity of the water is also important
which cause copper to combine with nitrate, sulfate, carbonate or
bicarbonate.Also Ph of the water is also important. But we do not have any
scientific value to compare our analysed results with any standard value.
So if any one have any information about the parameters of the water used
in
PCB preclean process can she or he kindly share these values with us?
Best Regards
Yusuf GÖMEÇ
Product Quality Engineer
BASKI DEVRE SAN ve TIC LTD STI
Ceyhan Sk. No:10 34896 Pendik-Istanbul-Turkey
Tel: 00 90 216 3901036 (4 Hat/Line)-173(Extention)
00 90 216 4836560 (4 Hat/Line)-173(Extention)
Fax: 00 90 216 3544941
00 90 216 4913269
Gsm: 00 90 533 6579897
00 90 533 7480014
Internet: www.baskidevre.com.tr
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|