Sender: |
|
X-To: |
|
Date: |
Fri, 16 Sep 2005 13:02:59 -0700 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
8bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=iso-8859-1 |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Hi Joseph,
Internally I specified a 6 inch minimum contact length with the chain connected at both ends to the cart, but I don't remember any ESD standards that concurred with this.
If you have access, you might check ANSI/ESD S6.1-2005 Grounding.
ANSI/ESD S20.20 does not list a spec controlling grounding of mobile equipment but does list the resistance requirement.
It cannot just be in contact with, or hanging down to the floor, instead it must function constantly as the cart is moved. If you break the connection to the grounded flooring, it will not work.
And don't forget the insulation problem that contamination such as dust will have on the chains so you have to include these in your audit program for equipment grounding verification.
Hope this helps,
Phil
Joseph Sokalski <[log in to unmask]> wrote:
Dear Technetters:
Has anyone seen a documented standard for the recommended drag chain length
attached to rolling carts? During a recent customer audit, I was cited for
insufficient chain contact with our ESD flooring. I looked in ANSI/ESD
S20.20-1999 and did not see any reference.
Any assistance would be appreciated.
Joseph Sokalski
Test Technology, Inc
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
http://mail.yahoo.com
|
|
|