Hi KEDs-Rich, AIMSs-David, John, SPVC, IPC LF Listservers,

Thanks David,

Rich, The cool down curve after soldering whether it be SMT or Wave is not
something that most of us ever examined or caused problems. Cool Down just
happened since we were dealing with a pretty neat metalurgy curve for SnPb
that was pretty flat with gentle upperward slopes on either side of the
183C (361F) eutectic point.


Yours in Engineering, Dave
YiEngr, MA/NY DDave

-------------------------------------------------------------------------------Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree
To temporarily stop/(start) delivery of Leadree for vacation breaks send: SET Leadfree NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-------------------------------------------------------------------------------