Subject: | |
From: | |
Reply To: | |
Date: | Tue, 23 Aug 2005 20:03:50 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi,
My past experience was that the outgassing from the BGA that cause the BGA
to "jump" off the pads.
I am not sure if you are facing the same symptom that I had. Anyway, bake
the BGA will kill off the "hopping". It also can happen to other kind of
components.
Good Luck !
KH Poh
At 08:15 AM 8/22/05 +0700, Le Thanh Tung wrote:
>Hello everybody.
>At present, we are facing to one problem as below:
>BGA component is shifted after go through reflow machine.
>We have checked 100% mounting condition at BGA location before reflow, we
>sure the BGA is not shifed but after reflow the shifted part defect still
>happened.
>although we lost much time to investigate but the problem is still not be
>overcome.
>The detail of BGA is as below:
> - BGA size: 15 x 15
> - Pitch: 1 mm
> - Ball dia.: 0.49 mm
> - Product: RoHS PCBA
>Anyone who have this experience?
>Thanks
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
>-----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|