TECHNET Archives

July 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Brooks,Bill" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Brooks,Bill
Date:
Thu, 28 Jul 2005 17:27:52 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (100 lines)
Thanks for responding Lee... 
 
After doing some investigation... I'm thinking a 8X10 assembly panel would
work well for our assembly folks and still be dividable into a 18X24 or
12X18 panel without difficulty... 
One shop recommended 8.2 X 11.2 as the maximum assembly panel so it gave
them room to put a .100 in router bit down the center and ¾ in. all round
the perimeter... another wants .400 in between the boards... still another
has many more standard panel sizes to work from and sees no problem with
many different configurations... it's a bit 'non-standard' if you ask me...
but that's what makes the challenge interesting... I'm wondering what other
folks are using for their standard assembly panels...
:-)
 
Bill Brooks - KG6VVP
PCB Design Engineer, C.I.D.+, C.I.I.
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
Datron World Communications, Inc.
_______________________________________
San Diego Chapter of the IPC Designers Council
Communications Officer, Web Manager
 <http://dcchapters.ipc.org/SanDiego/> http://dcchapters.ipc.org/SanDiego/
 <http://pcbwizards.com> http://pcbwizards.com 
-----Original Message-----
From: Lee parker [mailto:[log in to unmask]] 
Sent: Thursday, July 28, 2005 5:20 PM
To: TechNet E-Mail Forum; Brooks,Bill
Subject: Re: [TN] Standard panel size?...
 
Bill
 
18x24 is by far the most popular panel size used in the industry. Most
Chinese shops, however, often tailor the panel size to the board or subpanel
to optimize panel utilization. I suggest if you are using a Chinese shop you
consult with them and take advantage of this benefit. I worked in the AT&T
Richmond shop from the day it opened till it was shut down and we never
considered multiple sizes to be manageable.  After visiting many of the
shops in China, I have come to realize that not all knowledge resides in
North America.
 
Best regards
 
LeeJ. Lee Parker, Ph.D.
JLP Consultants LLC
804 779 3389  
----- Original Message ----- 
From: Brooks,Bill <mailto:[log in to unmask]>  
To: [log in to unmask] <mailto:[log in to unmask]>  
Sent: Thursday, July 28, 2005 6:45 PM
Subject: [TN] Standard panel size?...
 
Hi TechNet...

We are re-evaluating our board assembly panel sizes and want to get the best
yields from our vendor's manufacturing panels when we select the final size
of our 'standard' assembly panel...

What is your PCB manufacturing 'standard' panel size for glass/epoxy type
materials??? Some PCB vendors tell me they have a working panel size of
18x24 inches... what do you use? And why?

Thanks in advance for your help...

Bill Brooks - KG6VVP
PCB Design Engineer, C.I.D.+, C.I.I.
Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510
Datron World Communications, Inc.
_______________________________________
San Diego Chapter of the IPC Designers Council
Communications Officer, Web Manager
http://dcchapters.ipc.org/SanDiego/ <http://dcchapters.ipc.org/SanDiego/> 
http://pcbwizards.com <http://pcbwizards.com> 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] <mailto:[log in to unmask]>
with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask] <mailto:[log in to unmask]> : SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask] <mailto:[log in to unmask]> : SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
<http://listserv.ipc.org/archives> 
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
<http://www.ipc.org/contentpage.asp?Pageid=4.3.16>  for additional
information, or contact Keach Sasamori at [log in to unmask]
<mailto:[log in to unmask]>  or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2