(chuckle)...
-----Original Message-----
From: Stephen R Gregory [mailto:[log in to unmask]]
Sent: Thursday, July 21, 2005 6:48 PM
To: [log in to unmask]
Subject: Re: [TN] Soldermask inspection
Oh Yeah!?!? OH YEAH?
Well let me tell you buster, neither one of
us is is schizophrenic, at least I don't think so.
Shut up! Who's talking to you!
I am, and you can be a little over the edge
sometimes!
SHUT UP! Nobody asked you for your
opinion...besides, Mom always liked you better.
Don't bring Mom into this...
I'm not, just SHUT-UP!!
Hey, didn't you read Jack's email? Nothing
but technical stuff...CAN'T you read?
I can, but I didn't start this stuff, you
did...
No I didn't...
Yes you did...
No I didn't...
Yes you did...
No I didn't..
Yes you did...
JUST SHUT UP!!!
(Sorry folks, I have to intervene now. These
two guys are at each other's throats. I need
to nip this in the bud before it gets out of
hand. Just remember, there's only one, true, Stephen
R. Gregory. Not those other two
jokesters...I don't know where the hell those two guys came from)
-Stephen R Gregory-
Jerry Dengler <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
07/21/2005 12:53 PM
Please respond to TechNet E-Mail Forum
<[log in to unmask]>; Please respond to Jerry Dengler
<[log in to unmask]>
To: [log in to unmask]@SMTP@Exchange
cc: (bcc: Stephen R Gregory/LABARGE)
Subject: Re: [TN] Soldermask inspection
One is Stephen R Gregory, and the other is
Stephen Gregory. Maybe he's Schizophrenic.
Jerry
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On
Behalf Of Chris Ball
Sent: Thursday, July 21, 2005 1:42 PM
To: [log in to unmask]
Subject: Re: [TN] Soldermask inspection
Huh! What are the odds that two guys with
such similar names, working for the same company, would give such similar
answers? It's like Lou Gehrig getting Lou Gehrig's disease....
-Chris
Stephen R Gregory
<[log in to unmask] To: [log in to unmask]
OM>
cc:
Sent by: TechNet
Subject: Re: [TN] Soldermask inspection
<[log in to unmask]>
07/21/2005 01:34 PM
Please respond to
TechNet
E-Mail Forum; Please
respond to Stephen R
Gregory
Hi Cheryl!
IPC-600G,
section 2.9.3.3 says that if a soldermask dam (web) was supposed to be
there
between a BGA and a via, it should be there, otherwise it's nonconforming.
But it
doesn't say how big the dam should be...
Kind
regards,
-Steve
Gregory-
Senior
Process Engineer
LaBarge
Incorporated
Tulsa,
Oklahoma
(918)
459-2285
(918)
459-2350 FAX
Cheryl Johnson
<[log in to unmask]>
Sent by: TechNet
<[log in to unmask]>
07/21/2005 11:01 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to Cheryl Johnson
<[log in to unmask]>
To:
[log in to unmask]@SMTP@Exchange
cc: (bcc: Stephen R
Gregory/LABARGE)
Subject: [TN] Soldermask
inspection
Do you know
if any spec exists defining minimum soldermask webs
(particularly between vias and bga pads)?
Any
inspection criteria?
Your help is
appreciated.
Sincerely,
-----------------------------------
Cheryl
Johnson, C.I.D.+
Manager
ExcelStor US
Office, Engineering Services
Email:
[log in to unmask]
Tel: (303)
684-7291
Fax: (303)
684-7268
Mobile:
(303) 809-5815
-----------------------------------
---------------------------------------------------
Technet Mail
List provided as a service by IPC using LISTSERV 1.8e
To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY
(NOT the subject field): SIGNOFF Technet
To
temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive
ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET
Technet Digest
Search the
archives of previous posts at:
http://listserv.ipc.org/archives
Please visit
IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information,
or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
__________________________________________________________________
This message
may contain information that is privileged and confidential to LaBarge, Inc.
It is for use only by the individual or entity named above. If you are not
the intended recipient, you may not copy, use or deliver this message to
anyone. In such event, you should destroy the message and kindly notify the
sender by reply e-mail.
---------------------------------------------------
Technet Mail List provided as a service by
IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask]
with following text in the BODY (NOT the subject field): SIGNOFF Technet To
temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or
(MAIL) To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach
Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by
IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask]
with following text in the BODY (NOT the subject field): SIGNOFF Technet To
temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per
day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by
IPC using LISTSERV 1.8e
To unsubscribe, send a message to
[log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF
Technet
To temporarily halt or (re-start) delivery
of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information,
or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
__________________________________________________________________
This message may contain information that is
privileged and confidential to LaBarge, Inc. It is for use only by the
individual or entity named above. If you are not the intended recipient,
you may not copy, use or deliver this message to anyone. In such event, you
should destroy the message and kindly notify the sender by reply e-mail.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
