Sender: |
|
X-To: |
|
Date: |
Fri, 29 Jul 2005 14:32:16 +0100 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
And does this necessarily make any board that has been designed to the IPC-SM-782A specs wrong/old technology/bad etc?
Most likely not, but I'm sure that Nick will be able to answer your question.
Matthew Lamkin.
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]]On Behalf Of Rich
Schutz
Sent: Friday, July 29, 2005 2:28 PM
To: [log in to unmask]
Subject: [DC] IPC-SM-782 VS IPC-7351
We have been using IPC-SM-782 specs for years and have no problems. We
request that are customers use the IPC-SM-782 specs when designing there
PCBS. Some questions have come up in regards to the IPC-7351 specs, which
some of our customers are using for there designs. We typically review the
chip components on all of the boards we manufacture, in doing so I came
across an issue where the chip components specs have changed between the
IPC-782 and IPC-7351. My questions are:
1). Have the IPC-7351 specs replaced the IPC-SM-782 specs?
2). Which spec should we be designing to?
3). Why have the specs changed?
4). Are the IPC-7351 Specs incorrect?
Rich Schutz
CAD Engineer
Phone: 440-358-5217
Fax: 440-358-5201
Apsco, Inc
3700 Lane Road
Perry, Ohio 44081
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|