Hi Richard! Sorry but I don't know of any standards. However, I have had
good success responding to radiation damage questions using Tom Clifford's
article and the Nicolet Test Instruments Division Application Note titled "
Ionizing Radiation and its Effects Upon Electronic Components". There isn't
much else in the accessible published literature that is data relevant.
Good Luck.
Dave Hillman
Rockwell Collins
[log in to unmask]
"Stadem, Richard"
<Richard.Stadem@G
D-AIS.COM> To
Sent by: TechNet [log in to unmask]
<[log in to unmask]> cc
Subject
06/16/2005 09:40 Re: [TN] X-ray radiation limits
AM
Please respond to
TechNet E-Mail
Forum
<[log in to unmask]>
; Please respond
to
"Stadem, Richard"
<Richard.Stadem@G
D-AIS.COM>
Thanks, Bev.
I do have a copy. It is an excellent article. But I need standards.....
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bev Christian
Sent: Thursday, June 16, 2005 9:29 AM
To: [log in to unmask]
Subject: Re: [TN] X-ray radiation limits
Richard,
You might want to get a copy of "X-ray Inspection - Avoid Radiation
Damage" by Tom Clifford of Lockheed Martin. Unfortunately I cannot give
you more info about the reference, as that's all I know.
Bev
RIM
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stephen Gregory
Sent: June 16, 2005 10:05 AM
To: [log in to unmask]
Subject: Re: [TN] X-ray radiation limits
Hi Richard!
I asked that question of a former applications engineer (now sales
engineer)
of Fein Focus when she was here giving me a presentation on their Tiger
series system Tuesday.
I asked that question because their system can put out 160 kV at 1 mA.
I was told the only component that she has heard of possibly becoming
damaged was memory. She wasn't able to give me a specific level, but she
did say that it would need to be directed at the component for an
extended period of time.
She added that she hasn't heard of a Fein Focus system ever damaging
components.
Kind regards,
-Steve Gregory-
Senior Process Engineer
LaBarge Incorporated
Tulsa, Oklahoma
(918) 459-2285
(918) 459-2350 FAX
|---------+---------------------------->
| | "Stadem, Richard"|
| | <Richard.Stadem@G|
| | D-AIS.COM> |
| | Sent by: TechNet |
| | <[log in to unmask]>|
| | |
| | |
| | 06/16/2005 08:47 |
| | AM |
| | Please respond to|
| | TechNet E-Mail |
| | Forum; Please |
| | respond to |
| | "Stadem, Richard"|
| | |
|---------+---------------------------->
>-----------------------------------------------------------------------
---------------------------------------|
|
|
| To: [log in to unmask]
|
| cc:
|
| Subject: [TN] X-ray radiation limits
|
>-----------------------------------------------------------------------
---------------------------------------|
Does anyone have information on the X-ray radiation levels that can
potentially harm electronic components? I am looking for standards (IPC
or otherwise) that detail or recommend dosage limits for various
component package types and sizes.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------
__________________________________________________________________
This message may contain information that is privileged and confidential
to LaBarge, Inc. It is for use only by the individual or entity named
above.
If you are not the intended recipient, you may not copy, use or deliver
this message to anyone. In such event, you should destroy the message
and kindly notify the sender by reply e-mail.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential
information, privileged material (including material protected by the
solicitor-client or other applicable privileges), or constitute
non-public information. Any use of this information by anyone other than
the intended recipient is prohibited. If you have received this
transmission in error, please immediately reply to the sender and delete
this information from your system. Use, dissemination, distribution, or
reproduction of this transmission by unintended recipients is not
authorized and may be unlawful.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
