You might try Dymax.  They have been helpful in the past.

-----Original Message-----
From: Phil Nutting [mailto:[log in to unmask]]
Sent: Monday, June 27, 2005 10:03 AM
To: [log in to unmask]
Subject: [TN] Light Cure Adhesives


Our current adhesive of choice is RTV.  Unfortunately it has a long cure
time and may be banned from use in products going to the European Union in
the coming years.
 
Our application is bonding 4 capacitors together.  The adhesive needs to be
thick (medium to high viscosity) so it won't sag, drip or run before curing.
UV cure would be best from a time standpoint.  A "glob" of about 1/4" should
be about right for this bonding application.  The capacitors have an epoxy
coating and the operating temperature is about 50° C maximum submerged in a
dielectric oil.  Electrical or thermal conductivity is not needed.  Method
of application is expected to be via small air actuated syringe or similar.
 
Anyone want to put in their 2¢?
 
Sales calls offline please.
 
Phil Nutting
Design for Manufacturing Engineer
Kaiser Systems, Inc.
126 Sohier Road
Beverly, MA 01915
voice: 978-922-9300 x1310
fax: 978-922-8374
e-mail: [log in to unmask] <mailto:[log in to unmask]>  
www.kaisersystems.com <http://www.kaisersystems.com/> 
 
 

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------