Hi Technetters,
Looks like we might have solved our BGA intermittent.  Two boards were
accidently dropped from  a height of 12" (off a tray).  The (4) 1028 ball
BGAs popped off both boards!  What is really interesting is that all the
balls stayed on the boards, not on the device substrate.   Any idea what
would cause this?  I know that you normally need a hammer to get a BGA off
the board (unless you have an SRT).  The device sees about 205 C at peak.

Thanks in advance?
Kerry

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------