TECHNET Archives

May 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jason Gregory <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Jason Gregory <[log in to unmask]>
Date:
Fri, 6 May 2005 08:51:21 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (208 lines)
Hey! Didn't those Sunbeams have Ford 289s?

Jason Gregory
Manufacturing Engineer
Innova Electronics
(281)653-5593
(281)653-5594 fax
(281)212-0844 cell
[log in to unmask]


-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Bloomquist, Ken
Sent: Friday, May 06, 2005 8:45 AM
To: [log in to unmask]
Subject: Re: [TN] NTC Flux Cored Solder Shelf Life


Hi Mike,

Are you one of those fanatical restoration guys? I've heard of using
upholstery from the same year as your car but solder is carrying it a little
too far.

I have a 1960 Sunbeam Alpine. Do you have any 45 year old solder I could
borrow?

Happy Friday,

KennyB

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Mike Fenner
Sent: Friday, May 06, 2005 5:49 AM
To: [log in to unmask]
Subject: Re: [TN] Flux Cored Solder Shelf Life


Yes the high lead alloys will blacken off over a few years, resurrect if you
feel strongly enough by drawing the wire through a piece of folded paper a
few times before use.
Ordinary tin lead will be OK, at least the last one of my 1970s solder wire
spools still works fine, [satisfyingly as I last used it for repairing the
wiring loom on my 74 Triumph. Totally authentic period repair therefore]

Regards

Mike




-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of David D. Hillman
Sent: Friday, May 06, 2005 1:29 PM
To: [log in to unmask]
Subject: Re: [TN] Flux Cored Solder Shelf Life


Hi Gregg! Brian provided a great summary on the aging aspects of the flux
core - I can provide some information on solder. There is a "default" shelf
life for flux cored solder due to the oxidation of the solder alloy itself.
All solder alloys oxidize over time so there will be a point where it would
be prudent to no longer use an "old" flux cored solder roll. I have been
"collecting" old flux core solder rolls from various areas of our
manufacturing operations as "spring cleaning", part number revision, and
facility re-layout activities happen. Its has been a good way to keep
various odd solder alloy, flux combinations, and wire diameter variants on
hand. We just put one of those older rolls into the recycle bin - I had an
old Alpha Metals 10Sn/88Pb/2Ag solder roll with a "energized rosin" core
from the 70's that finally accumulated a thick enough oxidized skin that
inhibited soldering. I believe most of us would consider 30+ years of use
as indefinite shelf life!

Dave Hillman
Rockwell Collins
[log in to unmask]




             "Gregg A. Owens"
             <owensmttc@EARTHL
             INK.NET>                                                   To
             Sent by: TechNet          [log in to unmask]
             <[log in to unmask]>                                          cc

                                                                   Subject
             05/05/2005 02:30          [TN] Flux Cored Solder Shelf Life
             PM


             Please respond to
              TechNet E-Mail
                   Forum
             <[log in to unmask]>
             ; Please respond
                    to
             "Gregg A. Owens"
             <owensmttc@EARTHL
                 INK.NET>






TechNetters:

A student of mine has asked, what is the shelf life of flux cored
solder?

In reviewing J-STD-001 and J-STD-004 I can't find any specific guidance
or requirements from the Standards. I know newer rolls of solder
(depending upon the manufacturer) have date codes and expiration dates.

However, they have a wire solder spool still being used today that was
entered into their HazMat system in 1998 (no actual record of the
precise date of manufacture). The wire spool is removed from their
HazMat system when needed to uncontrolled/undocumented working
environments within their facility. Since the standards don't specify a
shelf life, what is considered best industry practices or is there a
Standard dealing with this issue?

Thanks for your responses.

Gregg A. Owens
Master IPC Trainer
Executive Director
Manufacturing Technology Training Center, Inc.
Mira Loma, CA 91752 USA
www.mttc-inc.com
815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------


:::::::::::::::::::::::::::

This email, its content and any files transmitted with it are intended
solely for the addressee(s) and may be legally privileged and/or
confidential. If you are not the intended recipient please delete and
contact the sender by return and delete the material from any computer. Any
review, retransmission, dissemination or other use of, or taking of any
action in reliance upon, this information by persons or entities other than
the intended recipient is prohibited.

Messages sent via this medium may be subject to delays, non-delivery and
unauthorized alteration. This email has been prepared using information
believed by the author to be reliable and accurate, but Indium Corporation
makes no warranty as to accuracy or completeness. In particular, Indium
Corporation does not accept responsibility for changes made to this email
after it was sent. Any opinions or recommendations expressed herein are
solely those of the author. They may be subject to change without notice.

:::::::::::::::::::::::::::

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2