 
| Subject: | |
| From: | |
| Reply To: | |
| Date: | Fri, 27 May 2005 17:59:13 -0400 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
Ray
I am suppressed to learn about you tin bath. Is there any data to support this is a true immersion process?
J. Lee Parker, Ph.D.
JLP Consultants LLC
804 779 3389
----- Original Message -----
From: R Sedlak<mailto:[log in to unmask]>
To: TechNet E-Mail Forum<mailto:[log in to unmask]> ; Lee parker<mailto:[log in to unmask]>
Sent: Friday, May 27, 2005 5:55 PM
Subject: Re: [TN] Immersion Plating
About Immersion plating... thickness is not necessarily an indicator of plating mechanism... except in the extreme thick plating.
It is quite possible to get much more than 10 microinches of plating using pure immersion plating techniques... we are very aware of this, because our immersion Tin bath gives 40+ microinches, and it is a pure immersion/galvanic plating mechanism.
My suspicion is that the faster an immersion plating bath plates, the thicker it can apparently plate up, as the plating is non-uniform at higher speeds, and you are building metal up high, while some areas are still exposed, and thus dissolving Copper, and feeding electrons to the built up areas.
I also suspect strongly that most immersion Silver plating baths are just that, immersion only.
When you get into electroless type plating, the baths become less stable, and much trickier to control.... as if I have to tell the people who have the onerous responsibility of maintaining Electroless Nickel plating baths.
Rudy Sedlak
RD Chemical Company
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|
