Ted,
If you are talking to me, yes we did, for boards with other finishes. It
worked very well for the particular paste in the particular cleaning
machine we have.
Bev
RIM
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ted Kong
Sent: May 11, 2005 8:20 PM
To: [log in to unmask]
Subject: Re: [TN] Washing OSP boards
Hi Mike,
Did you use IPA to clean the no-clean paste?
Ted
--- "Barmuta, Mike" <[log in to unmask]> wrote:
> Bev: It depends. :>)
> If you are using water soluble paste you should
> remove it as soon as
> possible. The higher activity level of the flux
> starts to react with the OSP
> coating.
> If you are using no-clean it's not as critical.
> However we remove(wash)the
> no-clean paste as soon as practical.
> Also it's important that the boards are thoroughly
> dried after wash. You
> don't want wet/damp boards sitting around with an
> OSP coating.
>
> We've held boards for up to a month after washing
> paste and did not
> experience any solderabilty or activation issues
> using ENTEK 106A+
>
>
> Regards
>
> Michael
> Barmuta
>
> Staff
> Engineer
>
> Fluke Corp.
>
> Everett WA
>
> 425-446-6076
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of
> Bev Christian
> Sent: Wednesday, May 11, 2005 9:51 AM
> To: [log in to unmask]
> Subject: [TN] Washing OSP boards
>
>
> TechNetters,
> If one were to wash misprinted OSP boards would it
> be worse to
> a) leave the solder paste on 4 hours and then wash
> and use right away
> or
> b) wash right away and then let sit four hours
> before reprinting and
> reflowing
>
> I looked in the archives, but didn't find anything
> that was particularly
> helpful.
>
> This is a general question so I can't give solvent,
> wash time (and thus
> amount of OSP left). So, Doug P., don't give me "it
> depends" as an
> answer!
>
> Bev
> RIM
>
>
>
>
>
---------------------------------------------------------------------
> This transmission (including any attachments) may
> contain confidential
> information, privileged material (including material
> protected by the
> solicitor-client or other applicable privileges), or
> constitute non-public
> information. Any use of this information by anyone
> other than the intended
> recipient is prohibited. If you have received this
> transmission in error,
> please immediately reply to the sender and delete
> this information from your
> system. Use, dissemination, distribution, or
> reproduction of this
> transmission by unintended recipients is not
> authorized and may be unlawful.
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using
> LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask]
> with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of
> Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts:
> send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach
> Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
>
-----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using
> LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask]
> with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of
> Technet send e-mail to [log in to unmask]: SET Technet
> NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts:
> send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
> additional information, or contact Keach Sasamori at
> [log in to unmask] or 847-615-7100 ext.2815
>
-----------------------------------------------------
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
