Kaye

I installed the first immersion silver process in North America in 1995 at the AT&T plant in Richmond. At the time, we were using cotton gloves to handle all product. After some enlighten changes were made, we were able to do away with this superstition and our quality actually improved. Cotton gloves transfer ever undesirable contaminate on to the board. I would avoid them and any other glove unless safety is an issue.

Best regards

Lee

J. Lee Parker, Ph.D.
JLP Consultants LLC
804 779 3389   
  ----- Original Message ----- 
  From: Kaye Clayo<mailto:[log in to unmask]> 
  To: [log in to unmask]<mailto:[log in to unmask]> 
  Sent: Wednesday, May 11, 2005 1:53 PM
  Subject: [TN] Gloves for handling Immersion Silver finished boards


  Hi Technet,

  Can anyone share what type of glove should be used when
  handling immersion silver boards?

  If the immersion silver manufacturers say that rubber bands are
  detrimental to the IAg finish, would latex gloves be bad also?
  Are cotton gloves the answer?  Is there another type of glove that
  is better?

  I have not been able to identify exactly what glove to use.
  Or, maybe the type of glove is not even an issue?

  Thanks in advance,

  Kaye Clayo

  CONFIDENTIALITY NOTE: This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this notice is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately.



  _____________________________________________________________________________
  Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com<http://www.ers.ibm.com/>
  _____________________________________________________________________________

  ---------------------------------------------------
  Technet Mail List provided as a service by IPC using LISTSERV 1.8e
  To unsubscribe, send a message to [log in to unmask]<mailto:[log in to unmask]> with following text in
  the BODY (NOT the subject field): SIGNOFF Technet
  To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]<mailto:[log in to unmask]>: SET Technet NOMAIL or (MAIL)
  To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]<mailto:[log in to unmask]>: SET Technet Digest
  Search the archives of previous posts at: http://listserv.ipc.org/archives<http://listserv.ipc.org/archives>
  Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16<http://www.ipc.org/contentpage.asp?Pageid=4.3.16> for additional information, or contact Keach Sasamori at [log in to unmask]<mailto:[log in to unmask]> or 847-615-7100 ext.2815
  -----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------