Thanks Rainer

Bob
----- Original Message -----
From: "Blomberg, Rainer (FL51)" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, May 04, 2005 3:28 PM
Subject: Re: [TN] Wire wrap update


> Reading your question precisely, I would answer, all of the wire in
contact
> with the terminal pin has to be covered with solder.  If, after dipping it
> into a solder pot some of it has dewetted, the dewetting criteria would
> apply.  Treat the wrap of transformer wire per IPC A-610 section 6.  Also,
> section 4.8 of IPC-A-620 should address your situation perfectly.
>
> > Rainer G. Blomberg
> > Honeywell -Space Systems Clearwater
> > Staff Production Engineer
> (727) 539-5534
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]]On Behalf Of Bob Arciolla
> Sent: Wednesday, May 04, 2005 11:09 AM
> To: [log in to unmask]
> Subject: [TN] Wire wrap update
>
>
> Hi all,
>
> Sorry for the crummy description of the problem. What I am really asking
> about is : I have a transformer wire that wraps around a pin and is dipped
> in a solder pot. How much of the wire has to be covered with solder. There
> is one turn of the transformer wire wrapped around the pin.
>
> Sorry Bob
>
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
> unsubscribe, send a message to [log in to unmask] with following text in the
> BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
> (re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet
> NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
> e-mail to [log in to unmask]: SET Technet Digest Search the archives of
> previous posts at: http://listserv.ipc.org/archives Please visit IPC web
> site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
> ext.2815
> -----------------------------------------------------
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
> -----------------------------------------------------
>
>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------