TECHNET Archives

May 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
TechNet E-Mail Forum <[log in to unmask]>, "Blomberg, Rainer (FL51)" <[log in to unmask]>
Date:
Fri, 6 May 2005 08:22:54 -0700
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, "Bloomquist, Ken" <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
quoted-printable
Content-Type:
text/plain; charset="iso-8859-1"
From:
"Bloomquist, Ken" <[log in to unmask]>
Parts/Attachments:
text/plain (34 lines)
I think Rainier hit the nail on the head. The torque for removing screws is time dependent. On my 45 year old Sunbeam I managed to twist off a couple of bolts that I know didn't take that much torque to put them in in the first place :-)

KennyB

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Blomberg, Rainer
(FL51)
Sent: Friday, May 06, 2005 7:59 AM
To: [log in to unmask]
Subject: Re: [TN] Torque


Ramon,
You must be working with old rusty bolts to get more torque to remove.  This
does not happen with clean, freshly torqued hardware.  Think of the
screw/thread as two ramps sliding together and you can visualize the physics
involved.  Loosening involves overcoming friction under the head and against
the threads.  When loosening, you are unloading the forces holding the
threads together...this is less friction, less torque than driving the
threads together.  I will try your experiment, but my experience is less
torque to loosen.

----Rainer

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2