TECHNET Archives

April 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Joyce Koo <[log in to unmask]>
Reply To:
Date:
Tue, 19 Apr 2005 17:18:30 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (46 lines)
my understanding of flash gold is electrolytic plated with 5-8 u-inches on
electrolytic or electroless Ni.
The ENIG is electroless Ni and immersion gold finishing.  The gold quality
normally is inferior than the flash electrolytic gold... but, dissolution
rate in solder may be a bit slower compare to the ENIG of same thickness....
All the ENIG guys is going to shot me alive....
                            jk

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Eddie Rocha
Sent: Tuesday, April 19, 2005 5:07 PM
To: [log in to unmask]
Subject: Re: [TN] ENIG vs Flash Gold


Flash gold is too general of a term. If you are to solder to the thinner
gold successfully it must be less than 20 uin.
-- Thanks,
Eddie Rocha
South Bay Circuits
(480) 940-3125 x122

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2