Subject: | |
From: | |
Reply To: | |
Date: | Thu, 21 Apr 2005 14:24:18 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Sorry, I been busy and couldn't reply to this. I have dropped solder
numerous time over the last thirty years. I agree with using the
aluminum baking pans -real ones not the one time use foil jobbies.
But, you guys a scaring me with all the ladling and moving of pans. I
have always adapted a pipe to extend the machine drain to a height that
is slightly greater than the height of the aluminum pan. Then you can
slide a pan under - open the drain valve to fill - shut off the valve
and slide the pan out, using pliers to move the pan - repeat ad nauseam.
Caution - the down spout pipe should be bigger than the machine's to
prevent its plugging and your plant's flooring material may need to be
considered.
Gary Camac
Anderson, Greg (GE Infrastructure) wrote:
>TechNet:
>
>We are going to drain and clean a wave solder pot in preparation for conversion to lead-free solder.
>
>We have not completely purged a wave solder pot in some time, and the people in the know have moved on.
>
>Does anyone have "best practices" recommendations for draining and handling the solder (other than BE VERY CAREFUL ! ) ?
>
>Greg Anderson
>GE Fanuc Automation
>Charlottesville, VA
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
>-----------------------------------------------------
>
>
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|