Thank you all for your responses to my query.  We have determined that we do
not have the resources to pursue this challenging project but I have
forwarded all of your responses to our customer and I invited him to contact
any of you directly if he thinks that your experience/services may prove
beneficial to him.

Regards
John

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Dennis Fritz
Sent: Saturday, March 05, 2005 1:14 PM
To: [log in to unmask]
Subject: Re: [TN] Conductive Pattern on Lexan?

John,

The key to your question about circuitry  on clear plastic is the required
adhesion.  There is a whole industry  dedicated to plating on plastics, and
many
standards and guidelines.  I  have inserted below information on this
business.  The book is available  from the National Association of Metal
Finishers
and I found at least one used  book site that had it, too.

Lexan is one plastic molded  into connectors, and these are frequently
plated
for EMI shielding.  That  requires temperature cycling and good adhesion.
Liquid Crystal Polymer is  also a polycarbonate, so the cycle to chemically
etch
Lexan for good  bonding would be similar, and LCP is now sometimes used in
flex circuitry.

Keeping one side clear to view through  may be more of a problem - that will
have to be masked in the chemical etch to  acheive adhesion.  Is your
application "see through" or "know light is  coming through"?.  If you can
see through
plastic, by nature, it will be  quite smooth - hence probably poor adhesion
from most processes - sputtering,  electroless, conductive paste, etc.
Selective chemical etching where  you want circuitry - possible, but you
will
probably need a couple of masking  steps in sequence.

Contact me off line if you want our  proprietary cycle for Lexan.  Sheet
thickness - no problem.  Length  and width of part?  This industry is used
to
plating automobile grilles and  hubcaps. Gold finish - a matter of building
up
copper thickness, and then  finishing with nickel and gold.

Denny Fritz
MacDermid, Inc.
*************************

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------