I recently was terminated from the LeadFree group because our e-mail
system was randomly bouncing e-mails sent from the listserver. I think
there are two problems. One I could fix via my IT guy and that was to
add the listserve name to the "accept list" in our e-mail system. The
other may be settings on the IPC server. We recently had issues with
two vendors running a specific model of a Cisco router.
Hope this is of some help.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of John Parsons
Sent: Tuesday, March 29, 2005 2:30 PM
To: [log in to unmask]
Subject: Re: [TN] technet
James,
I too was having some difficulties a little while back.
Logon here (subscribers corner linked from various places including here
http://listserv.ipc.org/archives/ )
http://listserv.ipc.org/scripts/wa.exe?REPORT&z=3
and check the status of your various subscriptions and adjust
accordingly.
I also found that sending commands to [log in to unmask] as
instructed in the messages returned when subscriptions were started did
not
work but sending here did [log in to unmask] .
Good luck,
John Parsons
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Marsico, James
Sent: Tuesday, March 29, 2005 11:10 AM
To: [log in to unmask]
Subject: Re: [TN] technet
Gentlemen,
If you recall, I'm not receiving any e-mails from Technet
([log in to unmask]
<mailto:[log in to unmask]> ) but I still get stuff from [log in to unmask]
<mailto:[log in to unmask]> . can anyone suggest what's happening?
Technet is
a valuable tool and I'd hate to loose the capability.
Thanks for your assistance in this matter.
Jim Marsico
Senior Engineer
Production Engineering
EDO Corporation
[log in to unmask] <mailto:[log in to unmask]>
631-630-5079
-----Original Message-----
From: Marsico, James
Sent: Tuesday, March 15, 2005 10:43 AM
To: Santasier, John; [log in to unmask]
Subject: RE: technet
Gentlemen, allow me to introduce you to one another. John,
Keach is
technical support for the IPC technical forums. Keach, John can act as
our
system administrator. As previously discussed, I fail to receive the
technical posts from [log in to unmask] <mailto:[log in to unmask]> , although
I
have been receiving Keach's e-mails (also ipc.org). Since this is a
valuable tool, perhaps between the two of you this problem can be
resolved.
Thanks for your assistance in this matter.
Jim Marsico
Senior Engineer
Production Engineering
EDO Corporation
[log in to unmask] <mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Marsico, James
Sent: Wednesday, March 09, 2005 4:00 PM
To: Santasier, John
Subject: FW: technet
John, ipc.org, who I used to get e-mails from, doesn't
see
anything wrong on their end. Any suggestions?
Jim Marsico
Senior Engineer
Production Engineering
EDO Corporation
[log in to unmask]
<mailto:[log in to unmask]>
631-595-5879
-----Original Message-----
From: Keach Sasamori [SMTP:[log in to unmask]]
<mailto:[SMTP:[log in to unmask]]>
Sent: Wednesday, March 09, 2005 3:25 PM
To: Marsico, James
Subject: RE: technet
James,
I checked the Technet logs and confirmed Technet posts
are
being sent to [log in to unmask] <mailto:[log in to unmask]>
. I
haven't been getting any error messages for dp.ail.com.
Keach
-----Original Message-----
From: Marsico, James [mailto:[log in to unmask]]
<mailto:[mailto:[log in to unmask]]>
Sent: Wednesday, March 09, 2005 2:07 PM
To: Keach Sasamori
Subject: RE: technet
Our administrator said that they do not block any mail.
He
asked if you were getting an error message at your end? BTW, I'm
getting
your e-mails which use ipc.org.
Jim Marsico
Senior Engineer
Production Engineering
EDO Corporation
[log in to unmask]
<mailto:[log in to unmask]>
<mailto:[log in to unmask] <mailto:[log in to unmask]> >
631-595-5879
-----Original Message-----
From: Keach Sasamori
[SMTP:[log in to unmask]]
<mailto:[SMTP:[log in to unmask]]>
Sent: Wednesday, March 09, 2005 2:05 PM
To: Marsico, James
Subject: RE: technet
James,
You might want to check with your system administrator
and
ask
if
they
are filtering out anything such as Technet posts.
We have been known to send out broadcast e-mails and
sometimes
they
result in organizations implementing filters for
ipc.org.
Keach
-----Original Message-----
From: Marsico, James
[mailto:[log in to unmask]]
<mailto:[mailto:[log in to unmask]]>
Sent: Wednesday, March 09, 2005 12:59 PM
To: Keach Sasamori
Subject: RE: technet
No... nothing from technet. When I sent out a 'test'
post,
someone
did
respond to me directly which I did receive, so
apparently,
my
technet
posts are getting out. It might be something at this
end.
Jim Marsico
Senior Engineer
Production Engineering
EDO Corporation
[log in to unmask]
<mailto:[log in to unmask]>
<mailto:[log in to unmask] <mailto:[log in to unmask]> >
631-595-5879
-----Original Message-----
From: Keach Sasamori
[SMTP:[log in to unmask]] <mailto:[SMTP:[log in to unmask]]>
Sent: Wednesday, March 09, 2005 1:56
PM
To: Marsico, James
Subject: RE: technet
Hi James,
I checked your subscription settings and could find
nothing
wrong. I
then deleted and re-subscibed you to Technet.
Are you getting any posts yet?
Keach
-----Original Message-----
From: Marsico, James
[mailto:[log in to unmask]]
<mailto:[mailto:[log in to unmask]]>
Sent: Wednesday, March 09, 2005 7:08
AM
To: Keach Sasamori
Subject: technet
Good day, I haven't been getting Technet posts for about
a
week
or
so...
anything wrong? Outgoing seems to work since I sent out
a
"test"
post
and got a few "out of office" responses, but nothing
from
Technet.
Help!
Jim Marsico
Senior Engineer
Production Engineering
EDO Corporation
[log in to unmask]
<mailto:[log in to unmask]>
<mailto:[log in to unmask]
<mailto:[log in to unmask]> >
631-595-5879
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
