Thanks a lot Mumtaz.  You have been very helpful.

Bill Mengers

 -----Original Message-----
From:   TechNet [mailto:[log in to unmask]]  On Behalf Of Mumtaz Bora
Sent:   Tuesday, March 15, 2005 6:25 PM
To:     [log in to unmask]
Subject:        Re: [TN]

Bill,
Please refer to IPC /WHMA-A-620  Requirements and Acceptance for Cable and
Wire Harness assemblies.




At 02:30 PM 3/15/2005 -0500, you wrote:
>Hi,
>
>Does anyone have any information or know where I should look to find
>something about how to fasten wires (solid and/or stranded) to relay
>sockets?  Is there a rule of thumb here?  One person I know says that if
>the wires are solid it is ok to clamp under screw or metal plate, but if
>they are stranded I should use a crimp lug and fasten the lug with the
>screw.  In other words, crimp lug if stranded, under screw or clamping
>plate if solid.  I would like to know where to look for information on this.
>
>Thanks,
>Bill Mengers
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------

Thank-you

Mumtaz

  D/ 8165 - SMT Process Quality
  Bldg. V244H
Voice  (858)-882-1967
Fax    (858)-882-3511
Page  (858)-635-1180
email: [log in to unmask]

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------