 
| Subject: | |
| From: | |
| Reply To: | |
| Date: | Mon, 14 Mar 2005 10:02:20 -0600 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
We've used Flex-Tac stencils before with good results, if you need paste.
Also had good luck with tacky/paste flux. Circuit Technology had them on
their webpage in most common sizes.
Mike Sewell
Jason Gregory
<jgregory@INNOVAE To: [log in to unmask]
LEC.COM> cc:
Sent by: TechNet Subject: Re: [TN]
<[log in to unmask]>
03/14/2005 09:49
AM
Please respond to
TechNet E-Mail
Forum; Please
respond to Jason
Gregory
Answer is either mini-stencil solder paste or flux the areas with paste
flux, then place BGA and reflow. I would go with paste flux (AIM WS300 or
equivalent).
Jason Gregory
Manufacturing Engineer
Innova Electronics
(281)653-5593
(281)653-5594 fax
(281)212-0844 cell
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Thornton White
Sent: Monday, March 14, 2005 9:26 AM
To: [log in to unmask]
Subject: [TN]
Hi All.
We have a customer who wants us to place BGA's for them on otherwise
comletely loaded PCB's.
Problem is, the BGA apertures were missed from their stencil.
Is it at all possible to load a BGA straight on to an unpasted (gold
finish)
card? What are the quality implications?
Assuming the answer to above is NO, does anyone have UK contacts for BGA
mini-stencils
Any advice would be appreciated.
Thanks in advance.
Thornton
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
__________________________________________________________________
This message may contain information that is privileged and confidential to
LaBarge, Inc. It is for use only by the individual or entity named above.
If you are not the intended recipient, you may not copy, use or deliver
this message to anyone. In such event, you should destroy the message and
kindly notify the sender by reply e-mail.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|
