Chris.
Try Kaisertech 0 23 8048 0725
They are the UK reps for Dima reflow ovens which are spec'd for Lead Free
and are available in various sizes including bench top size machines. They
also sell some P+P equipment.
Regards
Mark Austin
Process Engineer
ACW Technology Ltd
UK
===== Original Message from [log in to unmask] (TechNet E-Mail Forum) at
28/02/05 16:59
>To all tech netters.
>
>Good afternoon
>
>Does anyone know of any companies that manufacture or supply small reflow
>ovens for lead free, and surface mount for pick and place - low volume
>around 80-100 reels for prototype purposes?
>
>It seems that the new lead free equipment on the market is focusing on high
>volume, and it very costly.
>
>Any advice or pointers are much appreciated
>
>Chris
>
>Christopher Hughes
>Environmental Scientist
>[log in to unmask]
>
>Statement of Confidentiality The document transmitted by this e-mail
>contains information from Mabbett & Associates Ltd and its affiliates,
>holdings or entities and may contain confidential and privileged
>information. This information is intended for the use of the addressee
>named on this transmittal sheet. If you are not the addressee, any
>disclosure, photocopying, distribution, dissemination or use of its
>contents is strictly prohibited. If you have received this e-mail in
>error, please call us immediately so that we can arrange to retrieve the
>original document.
>
>Mabbett & Associates Ltd, Environmental Consultants & Engineers
>Lord Hope Building
>141 St. James Road
>Glasgow, UK
>G4 OLT
>Tel: 0141 553 2664
>Fax: 0141 553 2665
>www.mabbett.com
>
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of Richard
>Sent: 26 February 2005 20:05
>To: [log in to unmask]
>Subject: Re: [TN] Planar Transformer construction on circuit boards
>
>----- Original Message -----
>From: "Phil Nutting" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Friday, February 25, 2005 11:05 AM
>Subject: [TN] Planar Transformer construction on circuit boards
>
>
>> This is for the SMT process people. We
>> Good Friday Afternoon,
>>
>> This is for the SMT process people. We are making a surface mount board
>> that includes a planar transformer. If I take two sections of board and
>> have SMT style pads to mount one board to the other will I experience
>> reflow problems because the solder pads will be separated (a gap) by two
>> thicknesses of LPI mask?
>>
>
>Phil,
>Maybe I shouldn't answer since I'm not an SMT process person, but I made
>similar boards to adapt a thinner SOIC into a wider SOIC space. I don't
>remember if they ever reached the reflow stage (I think they did) but I know
>the hand assembled ones worked like a charm. I would think if your boards
>were bonded together and maybe edge plated there would be no problem.
>Good luck,
>Richard
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-615-7100 ext.2815
>-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
