TECHNET Archives

March 2005

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
TechNet E-Mail Forum <[log in to unmask]>, "Atkinson, Neil" <[log in to unmask]>
Date:
Thu, 3 Mar 2005 13:49:41 -0000
Reply-To:
Subject:
From:
Mike Fenner <[log in to unmask]>
Content-Transfer-Encoding:
quoted-printable
In-Reply-To:
Content-Type:
text/plain; charset="us-ascii"
MIME-Version:
1.0
Parts/Attachments:
text/plain (103 lines)
One of my former saltmines was a laser cutting house, mostly for ceramics,
but we did do "softstrates " like FR4 et.

It works well and once the laser is tuned in correctly quite complex shapes
can be done.
Most of the work we did though was rectification where scoring or mechanical
cutting had been poorly implemented or specified. It was always amazing how
often we were presented with fully assembled boards where no one had noticed
that scoring or routing had not been done right up till it came time to
break out the panels. (And how soon could we do all the remaining
unassembled ones)

More generally: for FR4 and in particular the high frequency substrate types
you need good vision systems or be prepared to re-adjust by hand during the
cut as the accuracy /stability of the substrate means that if you cut to
drawing then you can be in the "wrong place " with respect to board features
on multi ups /larger boards. This is more a function of the accuracy of the
X-y tables etc than the laser though. That is just a near dimensionless
blade.

The real down side is cost, you pay for machine time and lasering can be
slow compared to conventional methods. For rectification, small runs,
complex shapes, small size parts - or best all three - lasering is easy to
justify, for more usual stuff it's a little harder.


Hope this helps a bit


Regards

Mike





-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Atkinson, Neil
Sent: Tuesday, March 01, 2005 8:45 AM
To: [log in to unmask]
Subject: [TN] Laser Cutting PCBs


Does anyone out there have experience (good or bad) of depanelising FR1 PCBs
using lasers?

It seems like a really neat solution, no dust etc but I have not seen any
companies using this technology.

Neil
_____________________________
Neil Atkinson
Quality Manager
UK-NSI Co. Ltd.
Merse Road, North Moons Moat,
Redditch, Worcs. B98 9HL, U.K.
Tel: +44 (0) 1527 585055
Fax: +44 (0) 1527 585025
E-mail: [log in to unmask]
_____________________________


________________________________________________________________________
This e-mail has been scanned for all viruses by Star. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------


:::::::::::::::::::::::::::

This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please delete and contact the sender by return and delete the material from any computer. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited.

Messages sent via this medium may be subject to delays, non-delivery and unauthorized alteration. This email has been prepared using information believed by the author to be reliable and accurate, but Indium Corporation makes no warranty as to accuracy or completeness. In particular, Indium Corporation does not accept responsibility for changes made to this email after it was sent. Any opinions or recommendations expressed herein are solely those of the author. They may be subject to change without notice.

:::::::::::::::::::::::::::

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2