Has anyone ever had soldering issues with the SC79 packages.
A customer currently has parts soldered to the board. When they test the
parts, some of the parts do not get good power out. When the customer
applies more solder the parts achieve the proper power out. My thoughts
are that the component is floating above the solder and not properly
attached to the board. Has anyone else ever had this problem.
Please advise.
Thanks
(Embedded image moved to file: pic22022.pcx)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------