Hi Technetters:
I would like to know if anybody has experienced difficulties in flaring the flange of solder terminals. On J-std-001C 6.2.3 it states that the angle of flare shall be between 35 and 120 deg. Some terminals crack even if they are flared at 36 deg. Other terminals can be flared at 120 deg and not crack. I suspect that the plating finish has a lot to do with it.
Regards,
Ramon
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------