Well, you COULD buy a Valor seat, import your manufacturing information
(artwork, drill and route data, placement data, etc.), check it all, and
export your ODB++ :)
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587
http://www.tektronix.com http://www.pcb-designer.com
It's my opinion, not Tektronix'
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Tordahl,
Edward
Sent: Thursday, February 10, 2005 08:10
To: [log in to unmask]
Subject: [DC] Pads PowerPCB to ODB++
All,
We've been literally burned on our first attempts to migrate from simple
RS-274-X Gerber data to ODB++ outputs, we are wondering what other PAD's
users out there are using.
We used CAM350 to import the PAD's Database, import the Drill information
(which seems to be dropped on the way in), and output the ODB++ data.
Apparently, issues with Cu pours (like some there, some "magically" not)
among other things, seems to be inherent in the "seamless" translation among
these two programs.
Tech Support, did the usual "Not our issue, must be the other guy" routine.
(Lessons from Microsoft? Bringing me back to my IS cert).
The final Jeopardy question:
What third part software is available to the PAD's PowerPCB users to provide
good ODB++ data to our PC houses? (aka: Can I grow up and live the dream??)
Edward S. Tordahl, CID+, MCSE
Principal Designer, PADS PWB
CSD, Telephonics Corp
815 Broadhollow Road
Farmingdale, NY 11735
voice : 631.755.7752
fax : 631.755.7278
email: [log in to unmask]
__________________________________________________
I must go down to the seas again, for the call of the running tide
is a wild call and a clear call that may not be denied........
"Sea Fever" by John Masefield (Creed of the SV Zephyr)
Confidentiality Notice:
This e-mail and any attachments may contain proprietary or export restricted
information. If you are not the intended recipient or an authorized
transferee, use or dissemination is prohibited. Please delete and notify
sender.
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
