Hi Alvin,
Colin Lea in the UK did quite a bit of work on this in the late 80's--a good
deal of it can be found in his book "A Scientific Guide to Surface Mount
Technology," Electrochemical Publications, 1988.
It is a time/temperature issue--how long before the IMCs grow through the
surface and affect solderability. Yo my knowledge, little has been done in this
regard with LF-solders.
I will touch on some of this in my workshops that I will be giving in
Singapore May 4 & 5--for more detail on this please contact Chua Eng Guan at
www.upstar.com.sg.
Regards,
Werner Engelmaier
Engelmaier Associates, L.C.
Electronic Packaging, Interconnection and Reliability Consulting
7 Jasmine Run
Ormond Beach, FL 32174 USA
Phone: 386-437-8747, Fax: 386-437-8737, Cell: 386-316-5904
E-mail: [log in to unmask], Website: www.engelmaier.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 09:29:56 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06HTsOV036206
for <[log in to unmask]>; Thu, 6 Jan 2005 09:29:55 -0800 (PST)
Received: from listserv (10.10.209.56:2482) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 11:23:29 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4673945 for [log in to unmask]; Thu, 6 Jan
2005 11:23:23 -0600
Received: from mail.ipc.org (10.10.209.35:51379) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 11:23:19 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06HTQj5027930 for <[log in to unmask]>; Thu, 6 Jan 2005
11:29:26 -0600 (CST)
Received: from mailgate2.nl.thalesgroup.com(193.67.31.101) by mail.ipc.org via
csmap id 34111b42_6009_11d9_9b13_000347c25fc4_7361; Thu, 06 Jan 2005
17:34:23 +0000 (UTC)
Received: from mta1.nl.thales (mta1.signaal.local [193.67.31.130]) by
mailgate2.signaal.nl (4.8.1.149) with ESMTP id for <[log in to unmask]>;
Thu, 6 Jan 2005 18:26:49 +0100 (MET)
Received: from suna900.sc.signaal.nl (suna900.sc.signaal.nl [192.7.99.164]) by
mta1.nl.thales (4.9.7.3) with ESMTP id Eh233AAg for
<[log in to unmask]>; Thu, 6 Jan 2005 18:26:20 +0100 (MET)
Received: from scms1.sc.signaal.nl ([192.7.99.212]) by suna900.sc.signaal.nl
(Netscape Messaging Server 3.6) with ESMTP id AAA1B43 for
<[log in to unmask]>; Thu, 6 Jan 2005 18:26:13 +0100
Received: from scd01-MTA by scms1.sc.signaal.nl with Novell_GroupWise; Thu, 06
Jan 2005 18:24:35 +0100
X-Mailer: Novell GroupWise Internet Agent 6.0.2
MIME-Version: 1.0 (Generated by Clearswift ES version 4.8.1.149)
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
X-NAI-Spam-Score: -0.0
X-NAI-Spam-Rules: 1 Rules triggered BAYES_44=-0
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 18:24:24 +0100
Reply-To: TechNet E-Mail Forum <[log in to unmask]>,
Daan Terstegge <[log in to unmask]>
Sender: TechNet <[log in to unmask]>
From: Daan Terstegge <[log in to unmask]>
Subject: Re: [TN] HASL solder thickness impact on solderability...
X-To: [log in to unmask]
To: [log in to unmask]
Precedence: list
Hello Alvin,
Lots of good info about HASL can be found via my website at
http://www.smtinfo.net
Just click on the link named "HASL".
Best Regards,
Daan Terstegge
PCB Assembly Department
Thales Land&Joint Systems
Tel: +31(0)35 524 8297
Fax: +31(0)35 524 8181
Unclassified Email
>>> [log in to unmask] 01/06/05 02:06am >>>
hi,
the full title of this msg is: "HASL (hot air solder levelling) solder
thickness impact on solderability with SnPb and Pb-free solder"
i am currently in my 3rd year in a local university in singapore. the
above
named issue is a project that i am supposed to do. due to my lack of
knowledge in this field, i would like to seek the opinions, advice or
help
from the people with expertise here.
the project objectives are as follows:
1) To study the extent of inter-metallic layer on thin HASL coating
thickness and the influence on assembly solderability.
2) To study any implication of lead free HASL as a surface finishing
3) To compare solderability of thick and thin HASL solder thickness
with
both SnPb and PB free solder
i would appreciate any facts, info or links to relevant
articles/reports/journals/magazines pertaining to my scope of the
project.
many thanks!
regards,
alvin
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:20:11 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06IK3o1073876
for <[log in to unmask]>; Thu, 6 Jan 2005 10:20:11 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:14:56 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674192 for [log in to unmask]; Thu, 6 Jan
2005 12:14:55 -0600
Received: from mail.ipc.org (10.10.209.35:51944) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:14:50 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06IKvj5028694 for <[log in to unmask]>; Thu, 6 Jan 2005
12:20:57 -0600 (CST)
Received: from dytn-smtp2.trimble.com(208.19.78.242) by mail.ipc.org via csmap
id 66f8b6b2_6010_11d9_95fe_000347c25fc4_29191; Thu, 06 Jan 2005
18:25:54 +0000 (UTC)
Received: (qmail 16793 invoked by uid 503); 6 Jan 2005 13:45:18 -0500
Received: from 10.1.1.233 by dytn-smtp2.trimble.com (envelope-from
<[log in to unmask]>,
uid 108) with qmail-scanner-1.24 (clamdscan: 0.80/650. trophie:
6.810-1005/333/72790. spamassassin: 3.0.1. Clear:RC:1(10.1.1.233):.
Processed in 0.044344 secs); 06 Jan 2005 18:45:18 -0000
Received: from unknown (HELO usd-am-xch-02.am.trimblecorp.net) (10.1.1.233) by
dytn-smtp2.trimble.com with SMTP; 6 Jan 2005 13:45:18 -0500
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: Solder Joint Failures after Short-term Vibration
Thread-Index: AcT0HFF8qTqU9BuXRB61L4v+Mt5G/A==
X-NAI-Spam-Score: 0.0
X-NAI-Spam-Rules: 1 Rules triggered BAYES_50=0
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 13:19:01 -0500
Reply-To: TechNet E-Mail Forum <[log in to unmask]>,
Roger Stoops <[log in to unmask]>
Sender: TechNet <[log in to unmask]>
From: Roger Stoops <[log in to unmask]>
Subject: [TN] Solder Joint Failures after Short-term Vibration
X-To: "TechNet (E-mail)" <[log in to unmask]>
X-cc: Jason Young <[log in to unmask]>
To: [log in to unmask]
Precedence: list
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from quoted-printable to 8bit by mail.cruzio.com id j06IK3o1073876
Hello all,
We are having an ongoing problem with solder joint failures on a 144-pin PQFP processor, after short-term vibration. The board layout and mechanical mounting apparatus were designed with vibration in mind, and have passed vibration testing in the past. The same processor is used on a dozen other assemblies, none of which have this problem.
The solder joints appear to exhibit dewetting, although there is a toe and heel fillet. The heel fillet is unusually large, and the top of the PQFP lead has a grainy appearance instead of a matte or shiny appearance. Some leads can be pushed off the solder joint with very little pressure. Sn62Pb36Ag2 solder is being used, and our EMS provider continues to claim that boards meet IPC-A-610 class 2 requirements.
Any ideas as to what may be causing solder joint failures?
Also, any suggestions or recommendations (preferred) for a test house to provide x-ray, microsection and composition analysis?
TIA & Best Regards,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
Oh, and BTW, changing EMS providers is not an option...
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:25:23 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06IPJ2c077932
for <[log in to unmask]>; Thu, 6 Jan 2005 10:25:23 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:20:10 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674226 for [log in to unmask]; Thu, 6 Jan
2005 12:20:09 -0600
Received: from mail.ipc.org (10.10.209.35:52017) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:20:03 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06IQBj5028791 for <[log in to unmask]>; Thu, 6 Jan 2005
12:26:11 -0600 (CST)
Received: from az18nt141.honeywell.com(199.64.7.141) by mail.ipc.org via csmap
id 21698d46_6011_11d9_973a_000347c25fc4_7360; Thu, 06 Jan 2005
18:31:07 +0000 (UTC)
Received: from AZ18CN686.honeywell.com ([131.127.165.152]) by
az18nt141.honeywell.com with InterScan Messaging Security Suite; Thu,
06 Jan 2005 11:24:13 -0700
Received: from az18cn576.honeywell.com ([131.127.165.150]) by
AZ18CN686.honeywell.com with SMTP (Microsoft Exchange Internet Mail
Service Version 5.5.2657.72) id CN4P31GH; Thu, 6 Jan 2005 11:24:12
-0700
Received: by az18cn576.honeywell.com with Internet Mail Service (5.5.2657.72)
id <ZPTGR14D>; Thu, 6 Jan 2005 11:24:12 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2657.72)
Content-Type: text/plain
X-NAI-Spam-Score: -0.0
X-NAI-Spam-Rules: 1 Rules triggered BAYES_44=-0
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 11:24:07 -0700
Reply-To: TechNet E-Mail Forum <[log in to unmask]>,
"Blomberg, Rainer (FL51)" <[log in to unmask]>
Sender: TechNet <[log in to unmask]>
From: "Blomberg, Rainer (FL51)" <[log in to unmask]>
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
X-To: TechNet E-Mail Forum <[log in to unmask]>,
Roger Stoops <[log in to unmask]>
To: [log in to unmask]
Precedence: list
Sounds like a brittle joint. Are the leads pre-tinned to remove excess
gold to avoid "gold embrittlement"?
> Rainer G. Blomberg
> Staff Production Engineer
> Space Systems - Clearwater
> Honeywell International, Inc.
> * Phone (727) 539-5534
> * Fax (727) 539-4469
> * Email [log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Roger Stoops
Sent: Thursday, January 06, 2005 1:19 PM
To: [log in to unmask]
Subject: [TN] Solder Joint Failures after Short-term Vibration
Hello all,
We are having an ongoing problem with solder joint failures on a 144-pin
PQFP processor, after short-term vibration. The board layout and mechanical
mounting apparatus were designed with vibration in mind, and have passed
vibration testing in the past. The same processor is used on a dozen other
assemblies, none of which have this problem.
The solder joints appear to exhibit dewetting, although there is a toe and
heel fillet. The heel fillet is unusually large, and the top of the PQFP
lead has a grainy appearance instead of a matte or shiny appearance. Some
leads can be pushed off the solder joint with very little pressure.
Sn62Pb36Ag2 solder is being used, and our EMS provider continues to claim
that boards meet IPC-A-610 class 2 requirements.
Any ideas as to what may be causing solder joint failures?
Also, any suggestions or recommendations (preferred) for a test house to
provide x-ray, microsection and composition analysis?
TIA & Best Regards,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
Oh, and BTW, changing EMS providers is not an option...
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:28:31 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06ISUsQ080350
for <[log in to unmask]>; Thu, 6 Jan 2005 10:28:31 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:23:24 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674259 for [log in to unmask]; Thu, 6 Jan
2005 12:23:24 -0600
Received: from mail.ipc.org (10.10.209.35:52087) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:23:23 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06ITVj5028880 for <[log in to unmask]>; Thu, 6 Jan 2005
12:29:31 -0600 (CST)
Received: from mailserv58-us.natinst.com(130.164.14.247) by mail.ipc.org via
csmap id 98eda96a_6011_11d9_8d70_000347c25fc4_7411; Thu, 06 Jan 2005
18:34:28 +0000 (UTC)
Received: from postoffice7.natinst.com ([130.164.14.241]) by
mailserv58-us.natinst.com (Lotus Domino Release 6.5.1) with ESMTP id
2005010612273039-15540 ; Thu, 6 Jan 2005 12:27:30 -0600
X-Mailer: Lotus Notes Release 6.0.3 September 26, 2003
MIME-Version: 1.0
X-MIMETrack: Serialize by Router on PostOffice7/AUS/M/NIC(Release 6.5.1|January
21, 2004) at 01/06/2005 12:27:29 PM,
Itemize by SMTP Server on MailServ58-US/AUS/H/NIC(Release
6.5.1|January 21, 2004) at 01/06/2005 12:27:30 PM,
Serialize by Router on MailServ58-US/AUS/H/NIC(Release
6.5.1|January 21, 2004) at 01/06/2005 12:27:35 PM,
Serialize complete at 01/06/2005 12:27:35 PM
Content-type: text/plain; charset=US-ASCII
X-NAI-Spam-Score: -0.7
X-NAI-Spam-Rules: 1 Rules triggered BAYES_10=-0.7
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 12:27:31 -0600
Reply-To: TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Sender: TechNet <[log in to unmask]>
From: Cheryl Tulkoff <[log in to unmask]>
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
X-To: TechNet E-Mail Forum <[log in to unmask]>,
Roger Stoops <[log in to unmask]>
To: [log in to unmask]
In-Reply-To: <[log in to unmask]>
Precedence: list
Roger -
Does this board go through the wave solder process after SMT? You could be
seeing secondary reflow of the SMT joint at the wave. This happens when the
temperature of the wave process is sufficient to remelt topside joints. It
usually happens only on fine pitch QFPs(smaller joints with less solder
volume). To avoid this, most people will run the wave solder temperature
lower (240-250 C rather than 260C) and the conveyor faster (5.5 ft/min or
higher).
I can send more info if you're interested in checking it out.
Thanks,
Cheryl Tulkoff
Phone:(512) 683-8586
Fax: (512) 683-8847
National Instruments
11500 N. Mopac Expressway
Building A
Austin, TX 78759-3504
Roger Stoops
<Roger_Stoops@TRI
MBLE.COM> To
Sent by: TechNet [log in to unmask]
<[log in to unmask]> cc
Subject
01/06/2005 12:19 [TN] Solder Joint Failures after
PM Short-term Vibration
Please respond to
TechNet E-Mail
Forum
<[log in to unmask]>
; Please respond
to
Roger Stoops
<Roger_Stoops@TRI
MBLE.COM>
Hello all,
We are having an ongoing problem with solder joint failures on a 144-pin
PQFP processor, after short-term vibration. The board layout and mechanical
mounting apparatus were designed with vibration in mind, and have passed
vibration testing in the past. The same processor is used on a dozen other
assemblies, none of which have this problem.
The solder joints appear to exhibit dewetting, although there is a toe and
heel fillet. The heel fillet is unusually large, and the top of the PQFP
lead has a grainy appearance instead of a matte or shiny appearance. Some
leads can be pushed off the solder joint with very little pressure.
Sn62Pb36Ag2 solder is being used, and our EMS provider continues to claim
that boards meet IPC-A-610 class 2 requirements.
Any ideas as to what may be causing solder joint failures?
Also, any suggestions or recommendations (preferred) for a test house to
provide x-ray, microsection and composition analysis?
TIA & Best Regards,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
Oh, and BTW, changing EMS providers is not an option...
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:34:39 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06IYdwt084587
for <[log in to unmask]>; Thu, 6 Jan 2005 10:34:39 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:29:15 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674301 for [log in to unmask]; Thu, 6 Jan
2005 12:29:14 -0600
Received: from mail.ipc.org (10.10.209.35:52154) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:29:13 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06IZLj5028975 for <[log in to unmask]>; Thu, 6 Jan 2005
12:35:21 -0600 (CST)
Received: from dytn-smtp2.trimble.com(208.19.78.242) by mail.ipc.org via csmap
id 696d0c20_6012_11d9_973a_000347c25fc4_7360; Thu, 06 Jan 2005
18:40:17 +0000 (UTC)
Received: (qmail 20631 invoked by uid 503); 6 Jan 2005 13:59:41 -0500
Received: from 10.1.1.233 by dytn-smtp2.trimble.com (envelope-from
<[log in to unmask]>,
uid 108) with qmail-scanner-1.24 (clamdscan: 0.80/650. trophie:
6.810-1005/333/72790. spamassassin: 3.0.1. Clear:RC:1(10.1.1.233):.
Processed in 0.0518 secs); 06 Jan 2005 18:59:41 -0000
Received: from unknown (HELO usd-am-xch-02.am.trimblecorp.net) (10.1.1.233) by
dytn-smtp2.trimble.com with SMTP; 6 Jan 2005 13:59:41 -0500
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: [TN] Solder Joint Failures after Short-term Vibration
Thread-Index: AcT0HPb1k7IGdM/hRQKiYXEEwlroPQAATmqQ
X-NAI-Spam-Score: -0.0
X-NAI-Spam-Rules: 1 Rules triggered BAYES_44=-0
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 13:33:24 -0500
Reply-To: TechNet E-Mail Forum <[log in to unmask]>,
Roger Stoops <[log in to unmask]>
Sender: TechNet <[log in to unmask]>
From: Roger Stoops <[log in to unmask]>
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
X-To: TechNet E-Mail Forum <[log in to unmask]>,
"Blomberg, Rainer (FL51)" <[log in to unmask]>
To: [log in to unmask]
Precedence: list
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from quoted-printable to 8bit by mail.cruzio.com id j06IYdwt084587
No Au, appears to be SnPb (have seen these failures on parts dated from 2001-2002).
Roger
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Blomberg, Rainer
(FL51)
Sent: Thursday, January 06, 2005 1:24 PM
To: [log in to unmask]
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
Sounds like a brittle joint. Are the leads pre-tinned to remove excess
gold to avoid "gold embrittlement"?
> Rainer G. Blomberg
> Staff Production Engineer
> Space Systems - Clearwater
> Honeywell International, Inc.
> * Phone (727) 539-5534
> * Fax (727) 539-4469
> * Email [log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Roger Stoops
Sent: Thursday, January 06, 2005 1:19 PM
To: [log in to unmask]
Subject: [TN] Solder Joint Failures after Short-term Vibration
Hello all,
We are having an ongoing problem with solder joint failures on a 144-pin
PQFP processor, after short-term vibration. The board layout and mechanical
mounting apparatus were designed with vibration in mind, and have passed
vibration testing in the past. The same processor is used on a dozen other
assemblies, none of which have this problem.
The solder joints appear to exhibit dewetting, although there is a toe and
heel fillet. The heel fillet is unusually large, and the top of the PQFP
lead has a grainy appearance instead of a matte or shiny appearance. Some
leads can be pushed off the solder joint with very little pressure.
Sn62Pb36Ag2 solder is being used, and our EMS provider continues to claim
that boards meet IPC-A-610 class 2 requirements.
Any ideas as to what may be causing solder joint failures?
Also, any suggestions or recommendations (preferred) for a test house to
provide x-ray, microsection and composition analysis?
TIA & Best Regards,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
Oh, and BTW, changing EMS providers is not an option...
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:38:35 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06IcXLb087851
for <[log in to unmask]>; Thu, 6 Jan 2005 10:38:34 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:33:37 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674384 for [log in to unmask];
Thu, 6 Jan 2005 12:33:36 -0600
Received: from mail.ipc.org (10.10.209.35:52239) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:33:35 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06Idgj5029095 for <[log in to unmask]>; Thu, 6 Jan
2005 12:39:42 -0600 (CST)
Received: from rwcrmhc13.comcast.net(204.127.198.39) by mail.ipc.org via csmap
id 05948b78_6013_11d9_8568_000347c25fc4_7380; Thu, 06 Jan 2005
18:44:40 +0000 (UTC)
Received: from [127.0.0.1]
(pcp0010135783pcs.medfrd01.nj.comcast.net[68.39.17.94]) by
comcast.net (rwcrmhc13) with ESMTP id <2005010618374501500n6snae>;
Thu, 6 Jan 2005 18:37:45 +0000
User-Agent: Mozilla Thunderbird 0.9 (Windows/20041103)
X-Accept-Language: en-us, en
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
X-NAI-Spam-Score: -2.5
X-NAI-Spam-Rules: 1 Rules triggered BAYES_00=-2.5
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 13:37:26 -0500
Reply-To: [log in to unmask]
Sender: DesignerCouncil <[log in to unmask]>
From: Louis Dallara <[log in to unmask]>
Organization: Cad Labz
Subject: [DC] Question about Mentor
X-To: Designer Council Designers Council <[log in to unmask]>
To: [log in to unmask]
Precedence: list
Does any one know what platforms Mentor Boardstation runs on.
I know it use to be Unix based, but wonder if they have ported it to
Windows?
I could find the info on there web site
TIA
Lou Dallara CID
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
From [log in to unmask] Thu Jan 6 10:41:25 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06IfNBZ090068
for <[log in to unmask]>; Thu, 6 Jan 2005 10:41:24 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:36:13 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674430 for [log in to unmask]; Thu, 6 Jan
2005 12:36:11 -0600
Received: from mail.ipc.org (10.10.209.35:52297) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:36:11 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06IgIj5029177 for <[log in to unmask]>; Thu, 6 Jan 2005
12:42:18 -0600 (CST)
Received: from fw02.rockwellcollins.com(205.175.225.45) by mail.ipc.org via
csmap id 624f483a_6013_11d9_809e_000347c25fc4_7418; Thu, 06 Jan 2005
18:47:15 +0000 (UTC)
Received: by fw02.Rockwellcollins.com; id MAA05501; Thu, 6 Jan 2005 12:40:21
-0600 (CST)
Received: from nodnsquery(131.198.169.131) by fw02.rockwellcollins.com via smap
(V5.5) id xma005071; Thu, 6 Jan 05 12:39:05 -0600
Received: from smtpgw02.rockwellcollins.com (localhost [127.0.0.1]) by
vs01.rockwellcollins.com (8.11.7+Sun/8.11.7) with ESMTP id
j06Id5519522 for <[log in to unmask]>; Thu, 6 Jan 2005 12:39:06 -0600
(CST)
Received: from crnotes2.rockwellcollins.com (unverified) by
smtpgw02.rockwellcollins.com (Content Technologies SMTPRS 4.2.10)
with ESMTP id <[log in to unmask]>;
Thu, 6 Jan 2005 12:39:03 -0600
X-Mailer: Lotus Notes Release 6.5.2 June 01, 2004
X-MIMETrack: Serialize by Router on
CollinsCRSMTP02/CedarRapids/RockwellCollins(Release
6.5.3|September 14, 2004) at 01/06/2005 12:39:03 PM
MIME-Version: 1.0
Content-type: text/plain; charset="us-ascii"
X-NAI-Spam-Score: -0.0
X-NAI-Spam-Rules: 1 Rules triggered BAYES_40=-0
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 12:39:01 -0600
Reply-To: TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Sender: TechNet <[log in to unmask]>
From: "David D. Hillman" <[log in to unmask]>
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
X-To: [log in to unmask], [log in to unmask]
X-cc: [log in to unmask]
To: [log in to unmask]
In-Reply-To: <[log in to unmask]>
Precedence: list
Hi Roger! I recommend having a cross-section completed so you can get a
look at the solder joint/component lead interface to determine the quality
of the solder joint interface/structure. Good Luck.
Dave Hillman
Rockwell Collins
[log in to unmask]
Roger Stoops
<Roger_Stoops@TRI
MBLE.COM> To
Sent by: TechNet [log in to unmask]
<[log in to unmask]> cc
Subject
01/06/2005 12:19 [TN] Solder Joint Failures after
PM Short-term Vibration
Please respond to
TechNet E-Mail
Forum
<[log in to unmask]>
; Please respond
to
Roger Stoops
<Roger_Stoops@TRI
MBLE.COM>
Hello all,
We are having an ongoing problem with solder joint failures on a 144-pin
PQFP processor, after short-term vibration. The board layout and mechanical
mounting apparatus were designed with vibration in mind, and have passed
vibration testing in the past. The same processor is used on a dozen other
assemblies, none of which have this problem.
The solder joints appear to exhibit dewetting, although there is a toe and
heel fillet. The heel fillet is unusually large, and the top of the PQFP
lead has a grainy appearance instead of a matte or shiny appearance. Some
leads can be pushed off the solder joint with very little pressure.
Sn62Pb36Ag2 solder is being used, and our EMS provider continues to claim
that boards meet IPC-A-610 class 2 requirements.
Any ideas as to what may be causing solder joint failures?
Also, any suggestions or recommendations (preferred) for a test house to
provide x-ray, microsection and composition analysis?
TIA & Best Regards,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
Oh, and BTW, changing EMS providers is not an option...
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:45:07 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06Ij65t093283
for <[log in to unmask]>; Thu, 6 Jan 2005 10:45:07 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:40:05 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674469 for [log in to unmask]; Thu, 6 Jan
2005 12:40:04 -0600
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:40:04 -0600
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 12:40:04 -0600
Reply-To: TechNet E-Mail Forum <[log in to unmask]>,
Kelly Morris <[log in to unmask]>
Sender: TechNet <[log in to unmask]>
From: Kelly Morris <[log in to unmask]>
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
To: [log in to unmask]
Precedence: list
Cheryl's point on 2ndary reflow is a good one. I"ve seen this a couple of
times. Also, the fix of changing the wave solder parameters is good too.
Another idea for corrective action, if changing the wave parameters is not
a good choice is to add a thermal barrier to the area under the QFP on the
bottom side of the PCB. Polyimide tape (Kapton) works good for this. A
longer term fix may also be to mask over the vias in that area under the
QFP. The mask can provide enough of a thermal barrier to prevent 2ndary
reflow.
Kelly
On Thu, 6 Jan 2005 12:27:31 -0600, Cheryl Tulkoff <[log in to unmask]>
wrote:
>Roger -
>
>Does this board go through the wave solder process after SMT? You could be
>seeing secondary reflow of the SMT joint at the wave. This happens when the
>temperature of the wave process is sufficient to remelt topside joints. It
>usually happens only on fine pitch QFPs(smaller joints with less solder
>volume). To avoid this, most people will run the wave solder temperature
>lower (240-250 C rather than 260C) and the conveyor faster (5.5 ft/min or
>higher).
>
>I can send more info if you're interested in checking it out.
>
>Thanks,
>
>Cheryl Tulkoff
>Phone:(512) 683-8586
>Fax: (512) 683-8847
>National Instruments
>11500 N. Mopac Expressway
>Building A
>Austin, TX 78759-3504
>
>
>
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:54:45 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06IsiWv001490
for <[log in to unmask]>; Thu, 6 Jan 2005 10:54:45 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:49:40 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674506 for [log in to unmask]; Thu, 6 Jan
2005 12:49:39 -0600
Received: from mail.ipc.org (10.10.209.35:52436) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:49:38 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06Itkj5029371 for <[log in to unmask]>; Thu, 6 Jan 2005
12:55:46 -0600 (CST)
Received: from fw01.rockwellcollins.com(205.175.225.1) by mail.ipc.org via
csmap id 41c52bbe_6015_11d9_8a07_000347c25fc4_7417; Thu, 06 Jan 2005
19:00:42 +0000 (UTC)
Received: by fw01.rockwellcollins.com; id MAA19349; Thu, 6 Jan 2005 12:53:45
-0600 (CST)
Received: from nodnsquery(131.198.169.131) by fw01.rockwellcollins.com via smap
(V5.5) id xma019258; Thu, 6 Jan 05 12:53:04 -0600
Received: from smtpgw01.rockwellcollins.com (localhost [127.0.0.1]) by
vs01.rockwellcollins.com (8.11.7+Sun/8.11.7) with ESMTP id
j06Ir6n23219 for <[log in to unmask]>; Thu, 6 Jan 2005 12:53:06 -0600
(CST)
Received: from crnotes2.rockwellcollins.com (unverified) by
smtpgw01.rockwellcollins.com (Content Technologies SMTPRS 4.2.10)
with ESMTP id <[log in to unmask]>;
Thu, 6 Jan 2005 12:53:03 -0600
MIME-Version: 1.0
X-Mailer: Lotus Notes Release 5.0.10 March 22, 2002
X-MIMETrack: Serialize by Router on
CollinsCRSMTP02/CedarRapids/RockwellCollins(Release
6.5.3|September 14, 2004) at 01/06/2005 12:53:03 PM,
Serialize complete at 01/06/2005 12:53:03 PM
X-NAI-Spam-Score: 1.1
X-NAI-Spam-Level: *
X-NAI-Spam-Rules: 3 Rules triggered HTML_20_30=1.4, BAYES_30=-0.3,
HTML_MESSAGE=0.1
Content-Type: text/plain; charset="us-ascii"
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 13:53:02 -0500
Reply-To: TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Sender: TechNet <[log in to unmask]>
From: [log in to unmask]
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
X-To: [log in to unmask], [log in to unmask]
To: [log in to unmask]
Precedence: list
Roger,
If this part isn't having problems elsewhere, have you verified the same
pad pattern exists on all PWBs? I am assuming the same automated
soldering process is used on all these other assemblies. Do the other
assemblies see the same levels of vibration? Have you visually verified
the solder joints prior to vibration? Do all of the leads appear to have
this dewetting, or are there specific locations with the issue. If none
of these issues lead you anywhere, it would seem to point back to a
mechanical issue (resonance?) on this particular assembly.
Good luck!
Jim Carlson
Reliability/Quality Engineer
Rockwell Collins
Roger Stoops <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
01/06/2005 01:19 PM
Please respond to TechNet E-Mail Forum; Please respond to Roger Stoops
To: [log in to unmask]
cc:
Subject: [TN] Solder Joint Failures after Short-term Vibration
Hello all,
We are having an ongoing problem with solder joint failures on a 144-pin
PQFP processor, after short-term vibration. The board layout and
mechanical mounting apparatus were designed with vibration in mind, and
have passed vibration testing in the past. The same processor is used on a
dozen other assemblies, none of which have this problem.
The solder joints appear to exhibit dewetting, although there is a toe and
heel fillet. The heel fillet is unusually large, and the top of the PQFP
lead has a grainy appearance instead of a matte or shiny appearance. Some
leads can be pushed off the solder joint with very little pressure.
Sn62Pb36Ag2 solder is being used, and our EMS provider continues to claim
that boards meet IPC-A-610 class 2 requirements.
Any ideas as to what may be causing solder joint failures?
Also, any suggestions or recommendations (preferred) for a test house to
provide x-ray, microsection and composition analysis?
TIA & Best Regards,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
Oh, and BTW, changing EMS providers is not an option...
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
From [log in to unmask] Thu Jan 6 10:58:09 2005
Return-Path: <[log in to unmask]>
Received: from listserv.ipc.org (ip216-203-207-56.z207-203-216.customer.algx.net [216.203.207.56])
by mail.cruzio.com with ESMTP id j06Iw9H3003944
for <[log in to unmask]>; Thu, 6 Jan 2005 10:58:09 -0800 (PST)
Received: from listserv (10.10.209.56:2106) by listserv.ipc.org (LSMTP for Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6 Jan 2005 12:52:30 -0600
Received: from LISTSERV.IPC.ORG by LISTSERV.IPC.ORG (LISTSERV-TCP/IP release
1.8e) with spool id 4674574 for [log in to unmask]; Thu, 6 Jan
2005 12:52:27 -0600
Received: from mail.ipc.org (10.10.209.35:52512) by listserv.ipc.org (LSMTP for
Windows NT v1.1b) with SMTP id <[log in to unmask]>; Thu, 6
Jan 2005 12:52:25 -0600
Received: from mail.ipc.org ([10.10.209.34]) by mail.ipc.org (8.12.8/8.12.5)
with SMTP id j06IwWj5029479 for <[log in to unmask]>; Thu, 6 Jan 2005
12:58:32 -0600 (CST)
Received: from dytn-smtp2.trimble.com(208.19.78.242) by mail.ipc.org via csmap
id a6c9abe8_6015_11d9_8a07_000347c25fc4_7417; Thu, 06 Jan 2005
19:03:29 +0000 (UTC)
Received: (qmail 25309 invoked by uid 503); 6 Jan 2005 14:22:53 -0500
Received: from 10.1.1.233 by dytn-smtp2.trimble.com (envelope-from
<[log in to unmask]>,
uid 108) with qmail-scanner-1.24 (clamdscan: 0.80/650. trophie:
6.810-1005/333/72790. spamassassin: 3.0.1. Clear:RC:1(10.1.1.233):.
Processed in 0.048856 secs); 06 Jan 2005 19:22:53 -0000
Received: from unknown (HELO usd-am-xch-02.am.trimblecorp.net) (10.1.1.233) by
dytn-smtp2.trimble.com with SMTP; 6 Jan 2005 14:22:53 -0500
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: [TN] Solder Joint Failures after Short-term Vibration
Thread-Index: AcT0HbPP1XiXIowNRqGkHU1/7Gif2gAAK5ZQ
X-NAI-Spam-Score: -0.1
X-NAI-Spam-Rules: 1 Rules triggered BAYES_20=-0.1
Message-ID: <[log in to unmask]>
Date: Thu, 6 Jan 2005 13:56:34 -0500
Reply-To: TechNet E-Mail Forum <[log in to unmask]>,
Roger Stoops <[log in to unmask]>
Sender: TechNet <[log in to unmask]>
From: Roger Stoops <[log in to unmask]>
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
X-To: TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
To: [log in to unmask]
Precedence: list
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from quoted-printable to 8bit by mail.cruzio.com id j06Iw9H3003944
Sorry I did not provide more parameters...
No wave solder. Process is: 1) Screen paste bottom side. 2) place comps. 3) reflow. 4) screen paste top side. 5) place comps. 6) reflow. 7) clean. (etc, etc.). And the bottom side joints look pretty good.
I do not have more process info such as reflow profile.
And thanks Dave, we will need to have a cross-section FA done to really get at the bottom of this, but I will now be able to put together some specific questions that need to be asked of the EMS.
Have a conference call tonight, means I'll have to tape CSI...
Rgds,
Roger
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Cheryl Tulkoff
Sent: Thursday, January 06, 2005 1:28 PM
To: [log in to unmask]
Subject: Re: [TN] Solder Joint Failures after Short-term Vibration
Roger -
Does this board go through the wave solder process after SMT? You could be
seeing secondary reflow of the SMT joint at the wave. This happens when the
temperature of the wave process is sufficient to remelt topside joints. It
usually happens only on fine pitch QFPs(smaller joints with less solder
volume). To avoid this, most people will run the wave solder temperature
lower (240-250 C rather than 260C) and the conveyor faster (5.5 ft/min or
higher).
I can send more info if you're interested in checking it out.
Thanks,
Cheryl Tulkoff
Phone:(512) 683-8586
Fax: (512) 683-8847
National Instruments
11500 N. Mopac Expressway
Building A
Austin, TX 78759-3504
Hello all,
We are having an ongoing problem with solder joint failures on a 144-pin
PQFP processor, after short-term vibration. The board layout and mechanical
mounting apparatus were designed with vibration in mind, and have passed
vibration testing in the past. The same processor is used on a dozen other
assemblies, none of which have this problem.
The solder joints appear to exhibit dewetting, although there is a toe and
heel fillet. The heel fillet is unusually large, and the top of the PQFP
lead has a grainy appearance instead of a matte or shiny appearance. Some
leads can be pushed off the solder joint with very little pressure.
Sn62Pb36Ag2 solder is being used, and our EMS provider continues to claim
that boards meet IPC-A-610 class 2 requirements.
Any ideas as to what may be causing solder joint failures?
Also, any suggestions or recommendations (preferred) for a test house to
provide x-ray, microsection and composition analysis?
TIA & Best Regards,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
Oh, and BTW, changing EMS providers is not an option...
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|