Hey, finally a question I can answer. Russell, what you say is true, but
only if you are doing a qualification to J-STD-001, as you state in a later
reply. Then you need to have the test boards made from the same material
set as your product, made by the same vendors, run through the same
manufacturing process, etc.
To answer the original question, IPC test boards can be found at a number
of vendors. IPC used to keep them on hand but the demand was so low that
the boards often became unsolderable before they got sold. IPC has a list
of vendors that supply these boards, but I just looked it over and it is
severely out of date. For myself, I get the IPC boards for my studies from
Diversified Systems in Indianapolis. Pretty good quality, delivery and
price.
Follow this thread: http://www.divsys.com/ServicesProducts/PCB/IPCBoards/
Some of the test labs that supply SIR testing may also carry these boards.
One suggestion, wherever you get your boards, run them through a cleaning
process before you do any manufacturing studies. I have seen more SIR
tests messed up because the original boards were not clean than for any
other reason. If you don't have a cleaner in house, but have access to an
Ionograph or Omegameter, run a 15 minute cycle.
As for test labs, you should be able to get good service from Trace Labs,
Microtek Labs, Pacific Testing Labs, Delsen Labs, or Precision Analytical
Labs. All are active IPC participants in the SIR committees.
Doug Pauls
Rockwell Collins
"Nowland, Russell
Howard (Russell)"
<[log in to unmask] To
COM> [log in to unmask]
Sent by: TechNet cc
<[log in to unmask]>
Subject
Re: [TN] SIR coupons and test
12/14/2004 04:27
AM
Please respond to
TechNet E-Mail
Forum
<[log in to unmask]>
; Please respond
to
"Nowland, Russell
Howard (Russell)"
<[log in to unmask]
COM>
Ted,
You will need to contact your PWB supplier because the coupons must come
from the fab house that you use. They must also be from the same substrate
configuration (i.e. material, soldermask and surface finish) that you use.
If you are going to comply with IPC requirements you will need coupons from
each supplier and each fab configuration that you have. Therefore, you
cannot simply purchase off the shelf coupons. Sorry. Perhaps your fab
house will have some with your configuration already available.
Russell Nowland
Lucent Technologies
Quail Springs Parkway Plaza
14000 Quail Springs Parkway. Suite 300
Oklahoma City, OK 73134
Phone: 405-302-1660
Fax: 405-302-1622
Cell: 405-203-0034
email: [log in to unmask]
-----Original Message-----
From: Ted Kong [mailto:[log in to unmask]]
Sent: Monday, December 13, 2004 7:59 PM
To: [log in to unmask]
Subject: [TN] SIR coupons and test
Hi Fellow Technetter,
Does anyone know a place to get off-the-shelf SIR test
coupons. IPC supposes to have it, but nothing showed
up when I search for "B-24".
I am also looking for a place that can run the SIR
test as well. Please let me know it anyone out there
has a contact.
Thanks all in advance.
Ted
__________________________________
Do you Yahoo!?
Yahoo! Mail - 250MB free storage. Do more. Manage less.
http://info.mail.yahoo.com/mail_250
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|